Delphi's Ground-Breaking SCR Dosing System Reduces Both NOx and CO2

LUXEMBOURG -- (MARKET WIRE) -- Jul 21, 2010 -- Delphi Automotive has developed a breakthrough in NOx control for diesel engines with a new selective catalytic reduction (SCR) system that improves the performance, packaging and long-term reliability of the system as well as reduces vehicle CO2 emissions by up to 1g/km over any comparable system.

By injecting aqueous urea solution into a SCR system at up to four times the pressure of any previous system, which allows the catalyst to be close coupled to the engine, Delphi has solved many of the issues associated with other SCR systems.

"As the EU regulations for CO2 emissions take effect, every additional gram of CO2 could potentially cost the manufacturer up to 95 euros per vehicle in future emissions-related penalties," said Peter Spadafora, Delphi product team leader, SCR Systems. "The Delphi SCR system reduces both NOx and CO2 emissions in order to add maximum value for our customers."

A modular architecture
The system consists of three basic modules. The SCR doser (an injector with integrated high pressure pump) is mounted in the exhaust line just ahead of the SCR catalyst and injects the urea solution at 20 bar directly into the exhaust stream. The solution is supplied to the injector by a low pressure pump within the Urea Delivery Module (UDM) in the remote urea tank. The third element of the system is the electronics and software used to control the dosing subsystem.

The high pressure of the dosing injector, combined with an innovative insulation arrangement, prevents the urea solution from boiling within the doser, allowing its tip to be directly exposed to the hot exhaust. This unique architecture puts more energy into the urea spray which requires less mixing energy from the exhaust and eliminates deposit formation at the nozzle tip. It also ensures consistent spray performance over the entire life of the system. The superior performance of the Delphi doser allows exhaust designers to move the SCR catalyst closer to the engine which in turn saves on CO2 as catalyst heating and light-off strategies can be reduced.

Unlike alternative systems that use timed injector opening, the Delphi system uses a positive displacement solenoid pump that delivers an accurate, metered quantity of urea through the injector, regardless of supply pressure, throughout the lifetime of the system.

"As an experienced diesel fuel injection supplier, Delphi has the ideal combination of design and high-volume precision manufacturing expertise necessary to develop this new system," explained Spadafora. "In total, we now have 52 SCR patents and another 20 applications pending."

Additionally, the Urea Delivery Module (UDM) can be customized to integrate the functions of urea level sensing, lifetime filtration, heating for defrosting in winter and a delivery pump, packaging conveniently into the base of the tank. The delivery pump is only required to pressurise the urea solution to prevent boiling in the feed lines.

Simplified installation into the vehicle
The modular architecture of the main system elements simplifies installation into the vehicle and offers flexibility to individual vehicle manufacturers. Depending upon customer preference, Delphi can provide either a Dosing Control Unit, a simple Heater Control Module or just the software and electrical interface specifications to control the dosing sub-system. Where required, Delphi can also provide system services to specify and calibrate the dosing sub-system. Currently applicable to passenger cars and light commercial vehicles, the technology is also being developed with higher flows to suit medium- and heavy-duty diesels.

"Diesels provide an outstanding solution to the problem of CO2 reduction but, until now, the requirement to reduce NOx and CO2 simultaneously has been a challenge," concluded Spadafora. "Delphi's high pressure SCR dosing system will help vehicle manufacturers meet stricter NOx requirements such as EU6, Tier 2 bin 5 and corresponding Japanese regulations while improving CO2 emissions and minimising overall system cost."

The first production application of the Delphi SCR system is scheduled for introduction in 2012.

About Delphi

Delphi is a leading global supplier of electronics and technologies for automotive, commercial vehicle and other market segments. Operating major technical centers, manufacturing sites and customer support facilities in 30 countries, Delphi delivers real-world innovations that make products smarter and safer as well as more powerful and efficient. Connect to innovation at

Lynn Kier (United States)
+1 (248) 732-0615

Email Contact 

Malika Venezia (Europe)
+33 1 49 90 48 88

Email Contact 

Review Article Be the first to review this article

Autodesk University 2017

Featured Video
MCAD Corporate Newsletter
rss feed
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
GIS Software Developer for UDC at Englewood, CO
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise