Manufacturing technology consumption up 52.9% in 2010

July 12, 2010 - May U.S. manufacturing technology consumption totaled $178.34 million, according to AMTDA, the American Machine Tool Distributors’ Association and AMT - The Association For Manufacturing Technology.  This total, as reported by companies participating in the USMTC program, was down 22.9% from April but up 58.6% from the total of $112.42 million reported for May 2009.  With a year-to-date total of $966.63 million, 2010 is up 52.9% compared with 2009.

These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.

“While we would like to see first quarter growth rates continue, we are not surprised by the typical second quarter ebb and flow in capital spending,” noted Peter Borden, AMTDA president. “We have seen an additional month of substantial orders which helps to confirm that a sustainable recovery is taking place despite the buzz of those forecasting a W-shaped rebound. Industry forecasts for the year have been revised slightly upward by many sources and, if Congress passes the bonus depreciation allowance, this could accelerate growth even further.”

The United States Manufacturing Technology Consumption (USMTC) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and related equipment.  Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology consumption is also reported on a regional basis for five geographic
breakdowns of the United States.

Northeast Region

Northeast Region manufacturing technology consumption in May stood at $33.78 million, a drop of 7.2% when compared with the $36.38 million total for April but up 18.6% when compared with May 2009. With a year-to-date total of $159.16 million, 2010 was up 21.3% when compared with 2009 at the same time.

Southern Region

With a total of  $28.88 million, Southern Region manufacturing technology consumption in May was 9.7% less than April’s $31.99 million but 111.5% more than last May’s total.  The year-to-date total of $154.24 million was 86.5% above the comparable figure for 2009.

Midwest Region

May manufacturing technology consumption in the Midwest Region totaled $43.99 million, down 26.5% when compared with the $59.87 million total for April but up 56.1% when compared with May a year ago.  The $263.29 million 2010 year-to-date total was 45.0% higher than the total for the same period last year.

Central Region

At $53.00 million, May manufacturing technology consumption in the Central Region was down 28.4% from April’s $74.06 million but up 152.3% when compared with last May.  The $271.62 million year-to-date total was 82.7% more than the 2009 total at the same time.

Western Region

With a total of $18.70 million, Western Region manufacturing technology consumption in May fell 35.4% from April’s $28.93 million and was off 11.4% from the total for May 2009.  At $118.32 million, 2010 year-to-date was 34.3% higher than the comparable figure a year ago.

Review Article Be the first to review this article


Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Major Autodesk Disruption: Carl Bass Resigns
Inside Sales for SolidCAM at Newtown, PA
Director of Mechanical Engineering for Velodyne LIDAR at Morgan Hill, CA
Architetural Project Manager for DRA Architects at Irvine, CA
Imagery Analyst for ARA at Albuquerque, NM -1229, NM
Data Scientist for University of Utah at Salt Lake City, UT
Upcoming Events
SOLIDWORKS 2017 Launch Event – Dudley at The Conference Hub, Dudley College of Technology, DY1 4AS Dudley United Kingdom - Feb 22, 2017
DriveWorks World at The Barley Store Laskey Lane Thelwall Cheshire United Kingdom - Mar 6 - 9, 2017
JEC World 2017 at Paris Nord Villepinte Exhibition Centre Paris France - Mar 14 - 16, 2017
SOLIDWORKS funding event – Leicester at The National Space Centre, Exploration Dr, Leicester, LE4 5NS Leicester United Kingdom - Mar 17, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise