Synthesizable Models Enable Early Emulation & Rapid Prototyping

Technical Webinar on Wednesday, June 2, 2010

WALTHAM, Mass. — (BUSINESS WIRE) — May 27, 2010 — Bluespec Inc.

WHAT:   Webinar entitled: “Synthesizable Models Enable Early Emulation & Rapid Prototyping”
WHEN: Wednesday, June 2, 2010 at 11:00 AM PDT / 2:00 PM EDT / 18:00 GMT

In this webinar, engineers will learn how they can get complex models running at MHz speeds in weeks. They will explore typical modeling issues, such as the modeling gap and simulation bottleneck, and explore modeling tradeoffs between development time, execution time and accuracy. They will then watch as synthesizable models, test benches & transactors enable early emulation & rapid prototyping, illustrated by a demo of synthesizable models running at 10s of MHz on an FPGA board. Further information and registration for the webinar can be found on the website:

WHO: The webinar will be presented by Rishiyur S. Nikhil, co-founder and CTO of Bluespec, Inc.

About Bluespec

Bluespec is the Synthesizable Modeling Company™. With Bluespec, models and test benches can be synthesized along with legacy IP to employ emulation much earlier for modeling, verification and early software development. Bluespec makes emulation much easier, more affordable, and deployable from concept to volume silicon. With the only solutions built on atomic transactions, proven technology for managing and simplifying large-scale hardware concurrency, Bluespec provides the only general-purpose, high-level synthesis toolset for any use model (models, testbenches, production IP) and design type (datapath, control, interconnect). More information can be found on or by calling (781) 250-2200.

Copyright 2010 Bluespec, Inc. Bluespec is a registered trademark of Bluespec, Inc.

All other brands, products, or service names may be trademarks or service marks of the companies with which they are associated.




Bluespec Inc.
George Harper, 781-250-2200
Vice President of Marketing at Bluespec
Email Contact

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise