Boeing Completes First 787 GEnx Engine Runs

EVERETT, Wash., May 12 — (PRNewswire) — The first General Electric GEnx engines on a Boeing (NYSE: BA) 787 Dreamliner came to life Monday with initial engine starts. Customers can choose between the GEnx engines and the Rolls-Royce Trent 1000 engines to power their 787s.

"This is another exciting step in our progress on the 787 test program," said Scott Fancher, vice president and general manager of the 787 Program, Boeing Commercial Airplanes. "Our partners at GE have worked diligently to ensure their engines are ready for the testing that is going to occur both before first flight of ZA005 and throughout the flight test program."

Video of the engine run is available at www.boeing.com.

Following engine testing, ZA005, the fifth 787 to be built, will undergo a series of ground tests similar to those conducted on the first 787s to ensure that it is ready for first flight later this quarter.

About the Boeing 787 Dreamliner

The 787 Dreamliner is an all-new twinjet designed to meet the needs of airlines around the world in providing nonstop service between mid-size cities with new levels of efficiency. The airplane will bring improved levels of comfort to passengers with larger windows, bigger baggage bins and advances in the cabin environment, including lower cabin altitude, higher humidity and cleaner air. Delivery of the first 787 is planned for the fourth quarter of 2010.

Fifty-seven customers around the world have ordered 866 787s since the program was launched in April 2004, making the Dreamliner the fastest-selling new commercial jetliner in history.

CONTACT:

Lori Gunter

787 Communications

+1 206-931-5919

Photo and caption are available here: http://boeing.mediaroom.com/

SOURCE Boeing

Contact:
Boeing
Lori Gunter, 787 Communications of Boeing
Phone: +1-206-931-5919
Web: http://www.boeing.com




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise