Award-winning Industry Veteran, David Japikse, Discusses Modeling and Manufacturing of Turbocharger Compressors During SAE 2010 World Congress

The 2008 SAE Cliff Garrett Turbomachinery and Applications Engineering Award winner will be inducted into SAE 2010 College of Fellows


White River Junction, VT. – March 15, 2010 – Concepts NREC (CN), a world leader in turbomachinery design, research, engineering, and manufacturing, today announces that its Chairman of the Board/CEO, David Japikse, Ph.D., will present his paper, “Modeling and Manufacturing of Turbocharger Compressors,” as part of this year’s SAE International 2010 World Congress on April 15 at 1:00 p.m., Session PFL504 in room W2-61 at Cobo Center in Detroit, MI.  The theme for this year’s Congress is New Era—New Solutions New Congress, and Concepts NREC, with its ongoing innovations in designing, producing and manufacturing turbomachinery, exemplifies this theme with new turbocharger and small engine displays in Booth 306 during the exhibition, April 13-15. 

Japikse also will be inducted into the SAE’s College of Fellows at a reception on Monday, April 12, at 5:30 p.m. in the Ambassador Salon at the Detroit Marriott Renaissance.  Japikse was honored at the SAE 2009 World Congress as its 2008 SAE Cliff Garrett Turbomachinery and Applications Engineering Award winner. He is also a member of the National Academy of Engineering and the Vermont Academy of Science and Engineering.

“I am honored and pleased to be speaking once again at the SAE World Congress,” says Japikse.  “My discussion will underscore the importance of turbochargers and small engines in ushering in the new era of efficiency and innovative solutions.  CN will be exhibiting at Booth 306, where it will be presenting a broad range of turbomachinery capabilities, in particular work on turbochargers.”

CN has extensive experience in automotive and aerospace turbine and compressor development and will demonstrate some of its many innovative component solutions for today’s modern turbocharger and small engine applications. Learn about how CN is expanding the operating envelope of turbochargers to enable a single unit to replace two turbochargers operating in series or parallel.

According to the SAE, the Fellow grade of membership allows members to be recognized for exceptional personal contributions to the advancement of mobility technology of all self-propelled machinery -- on land, in the sea, air and space.  Fellow candidates must be SAE members for at least ten years and still be a voting member at the time of election.  Voting members nominate candidates, and five other member references must support each nominee.

About SAE International

SAE International is a global association of 115,000 engineers and related technical experts in the automotive, aerospace, and commercial-vehicle industries. SAE International’s core competencies are lifelong learning and standards development. SAE International’s charitable arm is the SAE Foundation, which supports many programs, including A World in Motion and the Collegiate Design Series.


About Concepts NREC

Concepts NREC is a leading worldwide organization providing turbomachinery design, engineering services, manufacturing and CAE/CAM software, with a staff of over 100 professionals at its facilities in Wilder, VT, and Woburn, MA.  For more than half a century, Concepts NREC has provided manufacturers, users, government agencies, and the engineering community with technology tools, services, and products that have met their needs, helped achieve their goals, and aided in development and production of some of the world’s most advanced products.  Concepts NREC is headquartered at 217 Billings Farm Road, White River Junction, VT, 05001-9486.  Telephone:  802-296-2321.  Facsimile:  802-296-2325.  For more information, go to:

# # #


Nitin Jain                                                         Donna St. Jean Conti, APR

Director of Marketing                                    President

Concepts NREC                                               St. Conti Communications

(781) 937-4611                                               (949) 290-0622

Email Contact                              Email Contact


Agile Engineering Design System, COMPAL, PUMPAL, FANPAL, RITAL, AXIAL, AxCent, Pushbutton CFD, STRESSPREP and AXISTRESS are trademarks or registered trademarks of Concepts ETI, Inc.

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Colortrac: LearnMore
TurboCAD pro : Free Trial

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise