INUS Releases Inspectworks™2.0 for SolidWorks Users

Seoul, South Korea — 30th March, 2010 -- INUS Technology announces the new release of Inspectworks 2.0, offering verification tools for the SolidWorks user. InspectWorks 2.0 is a major upgrade to the company’s SolidWorks plug-in based on Rapidform XOV. Design engineers use InspectWorks along with a 3D scanner to quickly investigate and verify that parts are manufactured to specification from SolidWorks. 

Within minutes, anyone with SolidWorks and the InspectWorks Add-in can open a part file and a 3D scan of the object, and see where the part is in or out of tolerance via a deviation color map. If there are dimensions or tolerances defined for the part, InspectWorks also provides measurements and pass/fail results automatically. InspectWorks 2.0 now includes multi-core processor support on the current Windows operating systems (32 and 64 bit on Windows XP, Vista and Windows 7). Enhancements to InspectWorks 2.0 include:

•Intelligent Best-fit where, rather than simply fitting the whole point cloud to the CAD model, the unique geometric features (e.g., plane, cylinder, etc.) are detected and used to perform alignment. This new technology succeeds where other metrology products fail with difficult alignments. For example, InspectWorks distinguishes small features like a small timing mark on a revolving part like a camshaft gear or blisk, and succeeds at finding a unique alignment solution. 

• New GD&T measurements have been added to Inspectworks 2.0, including;

- Straightness
- Circularity
- Line profile
- Surface Profile
- Runout

• Report Editor, enabling the user to define information about the current inspection project, such as part name, part number, serial number, color of pass / fail, etc. Each parameter is reported in a format compliant with the enterprise’s standards. 

InspectWorks 2.0 will be available in April from INUS Technology and its worldwide distributor network.For more information and to view a demonstration,  click here.



Read the complete story ...


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise