Boeing 787 Begins First Flight-Test Operations Outside of Washington

VICTORVILLE, Calif., March 9 — (PRNewswire) — The second Boeing (NYSE: BA) 787 Dreamliner, ZA002, landed at 10:53 a.m. local time today in Victorville, Calif. This marks the beginning of the first flight-test operations outside of Washington state for the program.

The airplane will be stationed at Victorville for approximately three weeks. The crew will conduct ground effects testing among other activities.

During ground effects testing, the pilots fly the airplane very close to the runway to gather data regarding the aerodynamic effects and performance of the airplane during the takeoff and landing phases of flight. Quantifying this performance is part of the certification requirements for all new airplanes.

"Victorville's airfield is the former George Air Force Base," said Randy Neville, chief pilot for ZA002. "There is ample ramp space for parking and plenty of on-site facilities. There is a long runway and plenty of level, clear land along the approach to the runway. We can operate there without disrupting air traffic control or other commercial aircraft."

A crew of more than 150 employees will be stationed at Victorville while the airplane is there. These include the flight test engineers and support personnel required to prepare the airplane for each day's flights and to monitor performance and test equipment.

"Our confidence in the reliability of this airplane grows day by day," said Scott Fancher, vice president and general manager of the 787 program. "Taking the airplane out of state for the first time is a big step, but one we're ready for."

Contact:

Lori Gunter

787 Communications

+1 206-931-5919

SOURCE Boeing

Contact:
Boeing
Lori Gunter of Boeing 787 Communications
Phone: +1-206-931-5919
Web: http://www.boeing.com




Review Article Be the first to review this article
SolidCAM: 10K CAM Contest

Featured Video
Jobs
CAD Design Specialist I for Waterpik, Inc. at Fort Collins, CO
IT Analyst III (GIS) for Orange County Sanitation District at Fountain Valley, CA
Upcoming Events
MOULDING EXPO at Messepiazza 1 70629 Stuttgart Germany - May 30 - 2, 2017
32nd International Forum on Design for Manufacture and Assembly (DFMA) at Crowne Plaza Hotel 801 Greenwich Avenue Warwick RI - Jun 6 - 7, 2017
Collier Research Composites Design Summer Training Class at 760 Pilot House Drive Newport News VA - Jun 12 - 16, 2017
2017 ESPRIT World Conference at Universal City CA - Jun 12 - 16, 2017
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise