Applied Robotics Announces New Diagnostic Module for SmartChange™ Tool Changers

Applied Robotics’ SmartCommCommunication Module Provides Diagnostic Information Reporting and Fast Tool ID Connections

GLENVILLE, N.Y. — (BUSINESS WIRE) — November 23, 2009 — Applied Robotics Inc., a leading global manufacturer of robotic end-of-arm tooling and connectivity solutions, brings electrical module design and functionality to the next level by adding tooling diagnostics and webpage features to their SmartModule line. Today Applied Robotics Inc. announced their innovative SmartCommcommunications module which supports Profinet, Ethernet/IP, Modbus TCP and DeviceNet communication protocols. The SmartComm module is featured on the new SmartChange tool changer (also announced this week). Both the SmartChange tool changer and SmartComm modules will be showcased on Applied Robotics’ partner’s booth (Innovation Matrix) at the International Robot Exhibition (iREX 2009) November 25 – 28th in Ariake, Japan.

This module is an open device level network that provides communication between simple industrial devices (such as sensors and actuators) and higher-level devices (such as robots, programmable controllers, and computers). The Module enables tool changers to be linked to a factory communications network to exchange data, as well as provide I/O capabilities, diagnostics reporting, and real time acceleration data.

The SmartComm Module provides extremely fast tooling network connection times. A connection time from the Robot Side Module to the Tool Side Module of 150ms uses a proprietary subnetwork. The patented SmartCharge feature improves connection times even further by eliminating power-up on the Tool Side. With SmartCharge enabled, connection times are 60ms or less.

Another key element in SmartComm is the diagnostic reporting feature. The Ethernet Diagnostics provide a webpage to set maintenance counters, valve configuration, naming, IP address and view information such as lifetime cycle counts, maintenance counts, timing of tool change functions, a histogram of timing trends, three axis accelerometer values, and data reports.

“With SmartChangeand especially with SmartComm, we feel we have something unique and quite innovative to offer customers,” said Jim Fitzgerald, vice president of Applied Robotics Inc. “We looked at every aspect of the tool changer and set out to develop a system that was stronger, smaller and smarter and we feel we not only met but exceeded market demands. We are very proud of this accomplishment.”

The SmartChange family of tool changers consists of four models - the SC125, SC160, SC200 and SC250, all with moment load capabilities that exceed the dynamic ratings of every robot currently available with respective faceplate mounting configurations of 125mm, 160mm, 200mm, and 150mm. More information on the SmartComm and the new family of tool changers can be found on the company’s website at www.appliedrobotics.com.

Applied Robotics Inc., headquartered in Glenville, N.Y., is an ISO-9001 registered, employee-owned company serving the world’s automation market. Founded in 1983, Applied Robotics designs and manufactures end-of-arm tooling and connectivity solutions intended to solve complex automation problems and improve efficiencies. Serving a wide spectrum of customers and industries ranging from large Fortune 500 companies to small privately-held businesses, the company’s wrist-down solutions can be found in manufacturing, welding, assembly, material removal and material handling applications throughout the United States, Canada, Pacific Rim, Europe, Mexico, Asia, South Africa, South America and Australia. More information can be found on the company’s website at www.appliedrobotics.com.

Applied Robotics, the Applied Robotics logo, SmartModule, SmartChange, SmartComm and SmartCharge are trademarks of Applied Robotics Inc. All other trademarks are owned by their respective companies.



Contact:

Applied Robotics Inc.
Joanne Brown, 518-384-1000 (Press and Industry Analysts)
Marketing Communications Mgr.
518-384-1200 (fax)
Email Contact




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise