ANSYS HPC To Enable High-Fidelity Insight and Productivity for Simulation Driven Product Development

New HPC Solutions Will Deliver Expanded Engineering Simulation Value

SOUTHPOINTE, Pa. — (BUSINESS WIRE) — October 1, 2009 — ANSYS, Inc. (NASDAQ: ANSS), a global innovator of simulation software and technologies designed to optimize product development processes, today announced plans to deliver ANSYS® HPC, a solution set that will enable customers to obtain enhanced insight and productivity through expanded use of high-performance computing (HPC) with engineering simulation. In contrast to single-point solutions that require separate licenses for each solver, the new ANSYS HPC products will provide a cross-physics parallel computing capability that supports structural, fluids, thermal and electromagnetics simulation in a single solution. Customers who need to combine multiphysics with HPC to address complex product development challenges stand to benefit from the outstanding value that the consolidated ANSYS HPC package will provide.

In addition, the new ANSYS HPC solution will encourage and facilitate the use of larger-scale parallel processing for high-fidelity simulation by making it more accessible to companies both large and small. The end result will be more detailed results and enhanced insight into product performance that cannot be obtained in any other way. The ANSYS HPC solution will be fully enabled with the upcoming ANSYS 12.1 release, and the cross-physics capability is now commercially available to customers.

“In the past, only the largest enterprises could afford a high level of parallel processing. The new ANSYS HPC solution will enable users across the spectrum to consider more detailed, accurate, and complete simulations than ever before — yielding the kind of detailed understanding that is critical to Simulation Driven Product Development™,” said Jim Cashman, president and CEO of ANSYS, Inc. “By providing a single scalable HPC solution that supports the full ANSYS portfolio, we are empowering customers to solve their most challenging design problems. The new solution will have built-in flexibility so customers can use their HPC licenses wherever they have computing resources and people.”

High-performance computing increases engineering productivity by accelerating simulation throughput, enabling customers to consider more design ideas and make efficient product development decisions based on enhanced understanding of performance tradeoffs. ANSYS HPC will include the flexibility and scalability to deliver this productivity across today’s increasingly distributed IT infrastructure and workforce. The new solutions from ANSYS will allow customers to exploit HPC resources within a workgroup or across a distributed enterprise, using local workstations, department clusters, or enterprise servers, wherever resources and people are located, removing artificial barriers to productivity.

ANSYS HPC will build on the impressive performance gains delivered with ANSYS 12.0, launched earlier this year. “HPC is evolving rapidly and requires a constant commitment,” Cashman continued. “We’ve achieved exciting milestones in our most recent release, including billion-cell fluids simulations, scaling to thousands of cores, and teraflop performance for structures. But we understand that this is just the beginning. Our development focus on HPC will provide our customers with future capability that we can only imagine today, using new and emerging technologies to deliver the next level of high-fidelity insight and throughput-driven productivity for engineering product development.”

About ANSYS, Inc.

ANSYS, Inc., founded in 1970, develops and globally markets engineering simulation software and technologies widely used by engineers and designers across a broad spectrum of industries. The Company focuses on the development of open and flexible solutions that enable users to analyze designs directly on the desktop, providing a common platform for fast, efficient and cost-conscious product development, from design concept to final-stage testing and validation. The Company and its global network of channel partners provide sales, support and training for customers. Headquartered in Canonsburg, Pennsylvania, U.S.A., with more than 60 strategic sales locations throughout the world, ANSYS, Inc. and its subsidiaries employ over 1,600 people and distribute ANSYS products through a network of channel partners in over 40 countries. Visit www.ansys.com for more information.

ANSYS, ANSYS Workbench, Ansoft, AUTODYN, CFX, FLUENT and any and all ANSYS, Inc. brand, product, service and feature names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries in the United States or other countries. All other brand, product, service and feature names or trademarks are the property of their respective owners.

ANSS-T



Contact:

ANSYS, Inc.
Media: Kelly Wall, 724-514-3076
Email Contact
or
Investors: Annette Arribas, 724-514-1782
Email Contact




Review Article Be the first to review this article
HP

Autodesk - DelCAM

Featured Video
Jobs
Principal Research Mechatronics Engineer for Verb Surgical at Mountain View, CA
Senior Mechanical Engineer for Verb Surgical at Mountain View, CA
CAD Systems Administrator for KLA-Tencor at Milpitas, CA
Industrial Designer Intern – Spring 2017 for Nvidia at Santa Clara, CA
Lead Geospatial Analyst for Alion at McLean, VA
Upcoming Events
SOLIDWORKS 2017 Launch Event – Walsall at Village Hotel Club, Walsall, WS2 8TJ Walsall United Kingdom - Mar 30, 2017
PI APPAREL Hong Kong 2017 at SHANGRI-LA KOWLOON 64 Mody Road Tsim Sha Tsui East Kowloon Hong Kong - Apr 5 - 6, 2017
SOLIDWORKS intro and hands on session – Slough at Baylis House, Slough, Berkshire, SL1 3PB Slough United Kingdom - Apr 7, 2017
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise