LMS Introduces LMS SCADAS 305 for Mobile Noise and Vibration Data Acquisition

Leuven, Belgium - May 6, 2003 - With the release of the LMS SCADAS 305
mobile testing system for noise and vibration, LMS further extends its range
of testing solutions. The latest and truly mobile member of the LMS SCADAS
III family can be installed just as easily in the test laboratory as in a
test vehicle. Supporting 4 up to 20 channels in a compact frame, the LMS
SCADAS 305 sets a new benchmark for high-performance mobile testing.

The newly released data-acquisition front-end is not just easy to carry; it
also offers easy cable connections. All cables, including the AC/DC power
cable, plug in the front side of the LMS SCADAS 305, facilitating
installations in locations that are small or difficult to access. The
wide-range power supply accepts AC and DC input voltages, but can also
operate from the built-in battery.

The mobile testing system packs the renowned quality and acquisition power
of LMS SCADAS III into a compact and rugged design, offering a versatility
of data-acquisition and signal-conditioning capabilities and maximum ease of
transportation. The hardware architecture that it shares with other LMS
SCADAS III test equipment makes that signal-conditioning modules are easily
interchangeable.

The scalability and modularity of LMS SCADAS III enables its users to apply
a high number of measurement channels in extensive testing campaigns, or
divide the channels over multiple simultaneous testing assignments. The
tight integration and optimal tuning between LMS SCADAS III test hardware
and LMS Test.Lab / LMS CADA-X software makes that this test platform offers
maximum performance and reliability.

Over recent years, LMS SCADAS III has become a well-established market
leader in noise and vibration testing in the automotive and other key
manufacturing industries. More than 800 LMS SCADAS III systems are in use,
representing a total count of over 24,000 measurement channels.

LMS SCADAS 305 at a glance

  •         Small rugged frame for use in the field: 370 x 80 x 360 mm - 14.57 x
    3.15 x 14.17 in 7 kg - 17.1 lbs (fully equipped)
  •         Expandable from 4 measurement channels up to 20
  •         Easy interchangeable signal-conditioning modules
  •         All connectors on front panel (AC/DC power cable connectors
    included)
  •         Battery operation mode
  •         On-board dual signal generation (no extra slot required)
  •         Built-in calibration source for easy system and module calibration
  •         SCSI host interface


    About LMS International

    LMS enables customers to engineer functional performance targets into their
    products, creating and maintaining distinctive brand values. LMS' unmatched
    understanding of the product development process is captured through a
    unique combination of products and services supporting physical and virtual
    product development: Test systems, CAE software products and engineering
    services. Critical attributes such as noise and vibration, ride, handling,
    motion, acoustics and fatigue are turned from problems to competitive
    advantage. LMS, a Dassault Systè­­es Gold Partner, is a global company with
    the vision, resources and commitment to significantly impact product
    development performance of its customers.

    For more information, see http://www.lms.be/



  • Review Article Be the first to review this article

    Featured Video
    Editorial
    Jeff RoweJeff's MCAD Blogging
    by Jeff Rowe
    Siemens Goes ECAD With Mentor Graphics Acquisition
    Jobs
    Mechanical Engineer for IDEX Corporation at West Jordan,, UT
    GIS Analyst II for Air Worldwide at Boston, MA
    Senior Structural Engineer for Design Everest at San Francisco, CA
    Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
    Upcoming Events
    Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
    Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
    Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
    SolidCAM: Program your CNCs directly inside your existing CAD system.



    Internet Business Systems © 2016 Internet Business Systems, Inc.
    595 Millich Dr., Suite 216, Campbell, CA 95008
    +1 (408)-337-6870 — Contact Us, or visit our other sites:
    AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
      Privacy Policy Advertise