CICC Features Tanner EDA Users Presentation on Analog Circuit Design, Learn About What's Behind the Electronic Design of the Hubble Telescope Camera at CICC

SAN JOSE, CA -- (MARKET WIRE) -- Sep 15, 2009 --


Who/What:

The IEEE Custom Integrated Circuits Conference (CICC) will feature interactive poster presentations by Tanner EDA's analog, mixed-signal design software users about what's behind the electronic design of the Hubble's telescope camera. The session is titled, "A 1.5mW 16b ADC with Improved Segmentation and Centroiding Algorithms and Litho-Friendly Physical Design (LFD) Used in Space Telescope Imaging Applications" and is presented by L. Lewyn, SnowBush-Gennum and M. Loose, Teledyne Imaging Sensors. During the session, the images from the camera will be featured and are also shown at http://abcnews.go.com/Technology/Space/popup?id=1884338.

Tanner EDA is the world leader in PC-based analog, mixed-signal (A/MS) and MEMS circuit design software.

When and Where
Tuesday, September 15, 5:30 pm to 7:00 pm
DoubleTree Hotel
San Jose, California

More Information

For more information about Tanner EDA, please visit www.tannereda.com.

For more information about CICC, please visit http://www.ieee-cicc.org/.

About Tanner EDA Software

Tanner Tools Pro™ is a software suite for the design, layout and verification of analog, mixed-signal, RF and MEMS ICs. It includes S-Edit for schematic capture, T-Spice for analog circuit simulation and L-Edit for physical layout. HiPer Silicon™ builds on the capabilities of Tanner Tools Pro with advanced features that improve designer productivity, including the HiPer Verify foundry-compatible physical verification engine, Verilog-A simulation, an interactive autorouter, and device layout automation. Tanner EDA software is available on the Windows® and Linux® platforms with flexible node-locked and networked licensing configurations.

About Tanner EDA

Tanner EDA is a leading provider of PC-based electronic design automation (EDA) software solutions for the design, layout and verification of analog and mixed-signal ICs and MEMS. Its solutions help speed designs from concept to silicon and are used by thousands of companies to develop devices cost-effectively in the biomedical, consumer electronics, wireless, imaging, power management, RF and photovoltaic market segments. Founded in 1988, Tanner EDA is a division of privately held Tanner Research, Inc.

Tanner EDA has been in the EDA market for over 20 years, and has shipped over 25,000 licenses of its PC-based electronic design software to more than 4,000 customers in 67 countries.

For more information on Tanner EDA products, visit www.tannereda.com.

Acronyms:
A/MS: Analog and Mixed Signal
EDA: Electronic Design Automation
PC: Personal Computer
MEMS: Microelectromechanical Systems
RF: Radio Frequency

Linux is a registered trademark of Linus Torvalds.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Tanner Tools Pro and HiPer Silicon are trademarks of Tanner Research, Inc.

All other trademarks and tradenames are the property of their respective owners.

Add to Digg Bookmark with del.icio.us Add to Newsvine

Press Contact:

Georgia Marszalek
ValleyPR for Tanner EDA
+1 650 345 7477

Email Contact





Review Article Be the first to review this article
Rand3D

Autodesk University 2017

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
GIS Software Developer for UDC at Englewood, CO
Structural Engineer for Albert Kahn and Associates at Detroit, MI
GIS Analyst for G2 Partners LLC at San Ramon, CA
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise