What's New in Pro/ENGINEER Wildfire 5.0?

PTC Express
 
June 2009
 
In This Issue
 
 
What's New in Pro/ENGINEER Wildfire 5.0?
 
 
 
Expanding the Enterprise: Breaking the Barriers to Collaborative Product Development
 
 
 
Bring Your 3D CAD Designs to Life with Rapid Color 3D Printing
 
 
 
Creating a Family Table Driven Assembly UDF with Component Instances in Pro/ENGINEER Wildfire 4.0
 
 
 
Surface Modeling in Pro/ENGINEER Wildfire 4.0 (Part 3)
 
 
 
Configuring Server-Side Watermarks for ProductView 9.1 Lite and Professional
 
 
 
Pro/ENGINEER CAD/CAM/CAE Demonstrations
 
 
 
Electronics & High Tech Demonstrations
 
 
 
Technical Illustration Tools Demonstration Series
 
 
 
Social Product Development: Join the Discussion
 
 
 
 
 
Dear Subscriber:

Summer is here, and with it comes the much-anticipated release of Pro/ENGINEER Wildfire 5.0 . This new release has over 100 new feature enhancements and promises to make design in multi-CAD environments much faster. It also makes some significant breakthroughs in Social Product Development capabilities. Also this month, visit the all-new Resource Center for Small and Medium Businesses , and don't miss the Electronics & High Tech Demonstration Webcast Series , now through September. 

Regards,


Nancy Pardo
Managing Editor

 
Mailbag
 
Sean B, Engineer, asks: In Pro/ENGINEER, how do I make a part look like chrome? The apperance tab in the material section does not have this choice. Ultimately I would like to make a rendered photo of this. We answer .
 
 
 
 
 
What's New in Pro/ENGINEER Wildfire 5.0?
With over 100 feature enhancements, Pro/ENGINEER Wildfire 5.0 removes barriers to collaboration and meets the challenges of today’s multi-CAD environments and dispersed systems.
Read more
 
 
Expanding the Enterprise: Breaking the Barriers to Collaborative Product Development
This white paper explores the pressures facing industrial manufacturers in today's global market and looks at how communication and collaboration is critical to driving competitive advantage in product development.
 
Bring Your 3D CAD Designs to Life with Rapid Color 3D Printing
Download "Achieving New Efficiencies in Rapid Color 3D Modeling" by Cadalyst Magazine to learn how to turn 3D CAD data like Pro/ENGINEER into accurate color models in just a few hours, for half the cost of traditional prototyping. Includes case studies on Timberland, Black & Decker, and Continental Tire.
 
 
Creating a Family Table Driven Assembly UDF with Component Instances in Pro/ENGINEER Wildfire 4.0
Assembly UDFs which contain assembly features and assembly components can easily be created to also contain instances with different feature dimensions and component instances.This tip demonstrates how to create an assembly UDF which contains a bolt and washer placed in a hole.
Read more
 
Surface Modeling in Pro/ENGINEER Wildfire 4.0 (Part 3)
In the last of this three-part series on Surface Modeling using Pro/ENGINEER, we'll look at surface extension and intersection, flat & filled sketch surfaces, and much more.
 
Configuring Server-Side Watermarks for ProductView 9.1 Lite and Professional
This month, learn how to configure server-side watermarks to be displayed in ProductView 9.1 Lite and Professional.
Read more
 
 
Pro/ENGINEER CAD/CAM/CAE Demonstrations
Jun 23, 2009 - Sep 25, 2009
This series includes an introduction to Pro/ENGINEER and other Pro/ENGINEER demos, as well as Pro/ENGINEER Production Applications, Pro/ENGINEER Mechanica Simulation and Routed Systems Designer & Cabling demonstrations.
 
Electronics & High Tech Demonstrations
Jul 9, 2009 - Sep 10, 2009
The Electronics & High Tech Demonstration Webcast Series will show your company how to improve the efficiency, productivity and communication between your ECAD design, engineering, manufacturing, and test groups. InterComm is an ECAD visualization and collaboration solution and EDAcompare compares the differences between design revisions.
 
Technical Illustration Tools Demonstration Series
Aug 18, 2009
Arbortext IsoDraw webcasts showcase PTC's comprehensive Technical Illustration Tools and present an overview of the Arbortext modules that allow efficient creation and maintenance of Technical Illustrations utilizing Pro/ENGINEER data as well as via other methods. Each webcast will feature a presentation and demo as well as a question and answer session.
 
 
Social Product Development: Join the Discussion
If you attended PTC/USER World Conference 2009 in Florida this month, there's a pretty good chance you heard the term Social Product Development. Social computing is changing communications today and it will change how you develop your products tomorrow. Learn why .
 






 
Announcements
 
InSight Environmental Compliance Demonstration: Introduction and Overview - Jun 25, 2009
 
Pro/ENGINEER Wildfire Hands On Workshop, hosted by Boston Engineering - Jul 10, 2009 - Aug 7, 2009
 
PTC Expands Product Analytics Strategy With Acquisition Of Relex Software Corporation
 
Social Networking in Engineering - article by Machine Design
 
PTC Announces Engagement With Nokia
 
Volvo Group Selects PTC As Strategic Partner For Future PLM Solutions
 
PTC Pro/ENGINEER Helps Penske Racing Team Claim Victory At Indianapolis 500 Memorial Day Race
 
Beijing Institute Of Technology Advances Green Vehicle Design With Pro/ENGINEER
 
PTC Expands Technology Leadership With Enhanced Product Development System Capabilities
 
PTC Extends Leadership In Aerospace & Defense With Samsung Thales Corporation’s Selection Of Pro/ENGINEER In Competitive Benchmark
 
Buehler Motor Standardizes On PTC Product Development System To Support Globalization Strategy
 
PTC Closes The Loop Between Product Requirements And Design With Windchill RequirementsLink
 
PTC Gold Loyalty Program Passes Savings On To Maintenance Customers
 
 


 
 
 

 




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise