Siemens PLM Software Technology Helps Automakers Meet New Fuel Economy Standards


Automakers Face Pressures to Bring New Cars to Market that Meet Stricter Fuel Efficiency Requirements
SAE WORLD CONGRESS and PLANO, Texas, April 7, 2009 – Siemens PLM Software, a business unit of the Siemens Industry Automation Division and a leading global provider of product lifecycle management (PLM) software and services, today announced that its technology will help automakers design and validate plants to support flexible manufacturing and drive innovation into vehicles to meet the new, stricter Corporate Average Fuel Economy (CAFE) standard of at least 35 mpg by 2020.

This month, key industry leaders will gather at SAE World Congress to discuss some of the critical issues facing automotive manufacturers, including new pressures to bring fuel-efficient vehicles to market at an accelerated pace to meet the more aggressive CAFE standard, a 40 percent increase passed by Congress in December 2007.

“To achieve the new CAFE standards, automakers will need to re-tool manufacturing facilities and make them much more flexible to accommodate the significant increase in variation of powertrains and the trend toward more models on fewer platforms,” said Dave Taylor, senior director, Automotive Industry Marketing, Siemens PLM Software. “Increasing collaboration between manufacturing engineering and product development will be critical in helping engineers develop vehicles that can be built in the same plant. Siemens PLM Software is dedicated to helping the automotive industry fulfill its commitment to the development of next-generation green vehicles by delivering software solutions that help our customers address these stricter requirements.”

Siemens PLM Software’s technology provides an integrated environment for the development, management and simulation of vehicle platforms, model variants, manufacturing processes and plants. By integrating information about the product and the manufacturing processes, companies can drive knowledge about manufacturing best-practices into the early phases of product development. This helps engineers and designers understand what capabilities exist in manufacturing so that vehicles can be designed to leverage those existing capabilities. Simple constraints such as common lifting points can be defined by manufacturing for product development, helping companies define a portfolio of products that can be manufactured in the same plant.

Automotive suppliers and manufacturers possess a tremendous amount of information, which needs to be visible to all departments across an organization. Having one single source of product and process knowledge enables global engineering teams to seamlessly integrate all aspects of a project and work together to optimize product development and manufacturing.

Teamcenter® software, Siemens PLM Software’s flagship digital lifecycle management solution and the world’s most widely used PLM portfolio, serves as a manufacturer’s information backbone. Teamcenter manages all product related data and makes it instantly available throughout an entire organization, helping to integrate manufacturing with design, and enable flexible manufacturing.

“With all of the increasingly complex components that are involved in the design and development of a vehicle, it is no longer effective to work in a manual environment. Automakers must have the information technology tools to connect the virtual world to the physical world, and we’ve integrated the tool sets to do just that,” added Taylor.

Tecnomatix® software, Siemens PLM Software’s digital manufacturing solution, helps automakers evaluate manufacturing alternatives by enabling them to better understand plant capabilities through simulation, and by facilitating increased planning accuracy and efficiency.

Siemens PLM Software is a leading provider of product lifecycle management (PLM) software and services for the automotive and transportation industry. Fourteen out of the top sixteen automotive OEMs in the world use Siemens PLM Software technology to enable their business process improvement initiatives. From early portfolio planning through product development, manufacturing and product obsolescence, leading automakers and their suppliers rely on Siemens PLM Software for PLM technology. The automotive industry has long understood and consistently used PLM technology to cut development costs, speed time-to-market, remain competitive and drive top-line growth.

Siemens PLM Software is a mission-critical partner with many automotive and transportation companies, providing PLM solutions to enable key business process improvement initiatives, such as: commonization and re-use, change management, global engineering, knowledge-driven automation and supply chain integration.

About Siemens PLM Software
Siemens PLM Software, a business unit of the Siemens Industry Automation Division, is a leading global provider of product lifecycle management (PLM) software and services with 5.9 million licensed seats and 56,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with companies to deliver open solutions that help them turn more ideas into successful products. For more information on Siemens PLM Software products and services, visit www.siemens.com/plm.

About Siemens Industry Automation Division
The Siemens Industry Automation Division (Nuremberg, Germany) is a worldwide leader in the fields of automation systems, low-voltage switchgear and industrial software. Its portfolio ranges from standard products for the manufacturing and process industries to solutions for whole industrial sectors that encompass the automation of entire automobile production facilities and chemical plants. As a leading software supplier, Industry Automation optimizes the entire value added chain of manufacturers – from product design and development to production, sales and a wide range of maintenance services. With around 42,900 employees worldwide Siemens Industry Automation achieved in fiscal year 2008 total sales of EUR8.7 billion.



Note: Siemens and the Siemens logo are registered trademarks of Siemens AG. Teamcenter and Tecnomatix are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. All other trademarks, registered trademarks or service marks belong to their respective holders.

Primary Contact
Debra Dekelbaum
+1 972 987 3271
Email Contact



Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise