EOS Laser-Sintering for Dental Crowns and Bridges

Dental industry still on the upswing despite difficult economic times

Krailling/Munich, 2 April 2009 – One particular sector of the rapidly growing healthcare industry is expanding even further: the market for dental implants. It is indisputable that even with the best of dental hygiene, nearly everyone will at some point or other need a dental implant of some sort. Cost consciousness, especially in the type of difficult economic circumstances that we are currently experiencing, is increasing all the more. There are already automated processing centers producing individual dental implants of the highest accuracy out of EOS CobaltChrome SP2, a biocompatible and CE-certified material, with e-Manufacturing using laser-sintering. This cost-effective method of making dental implants offers the possibility to challenge even manufacturers in the Far East and keep jobs in Europe.

Europe's dental industry continues to grow
According to a survey conducted by the Millenium Research Group, the European market for dental crowns and bridges will continue to grow steadily in the next few years. The factors expected to influence this development are manifold. Technological innovations in the field of manufacturing methods, such as laser-sintering, are all part of the process. New treatment methods as well as new materials are additional factors which will increase the number of dental restorations in the coming years. The survey calculated the market value in Germany in 2007 for crowns and bridges already to be US$ 900M - almost one half of the European dental industry's entire turnover. The Millenium Research Group estimates that the European market for crowns and bridges will grow annually by an average rate of eight percent until 2012.

Technological advancements in the field of dental care are contributing to this by employing production methods like laser-sintering to provide dental restorations which are simultaneously more affordable, more readily available and of high quality.
From casting to laser-sintering - producing dental implants today

Until now, dental implants have traditionally been made out of metal via a casting process. This process enabled a technician to produce 20 dental frames per day. Laser-sintering is a significantly superior method: one fully-automated laser-sintering machine can produce up to 450 parts for dental crowns and bridges within 24 hours, and all of the finished parts will be of the same consistently high quality. The time savings and the financial advantage that the dental laboratories gain are huge. The "messy" tasks of deflasking and cleaning moulds are dispensed with, thus allowing the dental technician to concentrate on his or her core competence, namely the post-processing of the metal structure and its aesthetic upgrade: ceramic veneering.

The technological heart of dental e-Manufacturing: EOSINT M 270
EOS's EOSINT M 270 laser-sintering system can manufacture dental implants by "direct metal laser-sintering" (DMLS) using a focused solid-state laser. The machine uses CAD data to produce, from metal powder and in only a few hours, the most complex of geometries which exhibit excellent mechanical properties, surface quality and detail resolution. The CE-certified EOS CobaltChrome SP2 alloy was developed by EOS especially for the dental industry for use in the EOSINT M 270.
EOS demonstrated the entire process chain at the 33rd International Dental Show (IDS) from 24 to 28 March 2009 in Cologne. All the steps involved in laser-sintering crowns and bridges were shown, from the initial scanner to the creation of the 3D CAD data and the laser-sintering machine, and ending with the finished veneered product - the skill which will remain in the hands of the dental technician. Martin Bullemer, EOS Key Account Manager Medical is convinced that "cost control as well as flexible and rapid product cycles will determine the future of the dental industry. Manufacturing with laser-sintering can offer all of this."

Dental models of the future
The further development of dental CAD/CAM applications with new impression and intraoral scanners will make it possible to send high-quality data directly to the processing centre. The only thing missing would be a dental model for occlusion testing and post-processing, or a workpiece holder for use during veneering.
Such a model can be laser-sintered on a FORMIGA P 100 from PA 2200, a top-quality plastic, on the basis of already available data. Consequently, laser-sintering provides a complete solution for the manufacture of dental implants.

About EOS
EOS was founded in 1989 and is the worldwide market leader in the field of laser-sintering. Laser-sintering is the key technology for e-Manufacturing. Components can be produced fast, flexibly and cost-effectively, directly from electronic data. The method accelerates product development and modernizes production processes. EOS completed the 2007/2008 business year with a turnover in laser-sintering of 70M euro, which is an increase of 17 percent on the previous year. The company currently employs more than 280 employees worldwide - 230 of these at its headquarters in Krailling near Munich. www.eos.info

Press contact for further information / photos:

EOS GmbH Electro Optical Systems
Claudia Jordan
Robert-Stirling-Ring 1
82152 Krailling bei Muenchen
Tel.: +49 89 893 36 134
Fax: +49 89 893 36 284
email: Email Contacto

Parker Group
Nick O’Donohoe
Email Contact

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
SolidCAM: Program your CNCs directly inside your existing CAD system.
TurboCAD pro : Free Trial

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise