Raydium Standardizes on SpringSoft Laker System for Custom Design of LCD Driver ICs

HSINCHU, Taiwan—(BUSINESS WIRE)—March 4, 2009— SpringSoft, Inc., a global supplier of specialized IC design software, today announced that Raydium Semiconductor Corporation has standardized on the Laker™ Custom Layout System. Raydium is a global solution provider of TFT-LCD driver ICs that are used in both large and small display panel products. By adopting the Laker software product, Raydium engineers are better able to address the time-to-market pressures, cost and increased complexity of custom chip design for high performance, low-power LCD applications.

As a long-time Laker system customer, Raydium has integrated the powerful rules-driven automation and device-level features into its standard design layout methodologies. Engineers have realized as much as 50 percent time savings during layout operations, using the patented Laker Magic Cell (MCell™) technology that automates device generation, editing, and manipulation, and the Laker schematic-driven layout (SDL) flow that enables Raydium engineers to quickly comprehend the physical implementation and any associated ECOs.

“We are continuously fine-tuning methodologies and tool flows, in order to improve the efficiency of our design and layout teams,” said Chin-Chieh Chao, Vice President of Development Center at Raydium. “We’ve been using the Laker system for more than four years now because it provides the most efficient platform for custom layout. The time our engineers save in layout by using Laker is spent creating the highest quality designs, which is critical to our success in becoming the trusted IC partner for our customers.”

“Our aim is to save engineers time,” stated Duncan McDonald, Director of Custom IC Product Marketing at SpringSoft. “We’re happy to see that customers like Raydium are taking advantage of our unique Laker technology so they can spend more time adding value to their designs.”

About The Laker Custom Layout System

The Laker layout system offers the power of controllable automation and unmatched interoperability to achieve superior layout results with less effort for analog, mixed-signal, and custom digital designs. More than 300 companies worldwide, including 7 of the top 10 semiconductor companies, have adopted the Laker layout system for designs down to 45 nanometers. For more information about the Laker products, visit: http://www.springsoft.com/product/.

About Raydium

Raydium Semiconductor Corporation is a global IC solution provider of TFT-LCD driver ICs. Specializing in the development, engineering, sales and marketing of TFT-LCD driver ICs, such as source and gate drivers, Raydium is devoted to further increase their research development capabilities in the future to become a leading IC design company.

About SpringSoft

SpringSoft, Inc. (TAIEX:2473) is a global supplier of specialized automation technologies that accelerate engineers during the design, verification and debug of complex digital, analog and mixed-signal ICs, ASICs, microprocessors, and SoCs. Its award-winning product portfolio features the Novas Verification Enhancement and Laker Custom IC Design solutions used by more than 400 of today's leading IDM and fabless semiconductor companies, foundries, and electronic systems OEMs. Headquartered in Hsinchu, Taiwan, and San Jose, California, SpringSoft is the largest company in Asia specializing in IC design software and a recognized industry leader in customer service with more than 400 employees located in multiple R&D sites and local support offices around the world. For more information, visit www.springsoft.com.

Laker is a trademark of SpringSoft, Inc. All other trademarks or registered trademarks are the property of their respective owners.



Contact:

SpringSoft, Inc.
Stacey Hsieh, + 886-3-5794567 Ext. 686
Email Contact
or
SpringSoft USA
Rob van Blommestein, +1-408-467-7872
Email Contact
or
Wired Island, Ltd.
Laurie Stanley, + 1-978-834-6560
Email Contact

 




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise