Mastercam’s Multiaxis Machining Increases Speed and Finish

 

March 4, 2009 Tolland, CT – Multiaxis machining can dramatically increase a shop’s competitiveness, and Mastercam’s multiaxis machining offers a wide range of multiaxis machining strategies – both basic and advanced. Some enhancements to Mastercam’s multiaxis machining include features in the Port5ax and Flow5ax toolpaths, TrueSolids 5-axis verify improvements, and much more.

Port5ax and Flow5ax Toolpaths – These toolpaths now include a new feature that allows an overlap or blend to be added at the beginning and end of a toolpath. This feature is very useful in creating better finishes where toolpaths may need to meet from opposite directions. Several options are available for controlling the start and end of a port or flowline multiaxis toolpath, including skipping the first pass, last pass, or both, and blending the entry, exit, or both.

TrueSolid 5-axis Verify– TrueSolids 5-axis Verify is now included in Mastercam’s multiaxis machining. TrueSolid 5-axis Verify uses solid modeling technology for toolpath simulation. After verifying a part in TrueSolid mode, you can rotate and magnify the part to more closely check features, surface finish, or scallops.

Smart Interface – Mastercam’s advanced multiaxis machining lets you choose what type of project you are doing, and adjusts the interface to show exactly what you need to complete your job.

Other multiaxis features include:
- General speed improvements
- Advanced gouge checking and 5-axis safe zone around parts help ensure safe cuts in even the most complex operations
- Machine 5-axis curves with independent definitions of tool side angle and lead/lag angle
- Special options for machining cylinder heads and converting probe data to machinable geometries
- Much more.



About Mastercam

Developed by CNC Software, Inc., Mastercam is Windows®-based CAD/CAM software for 2- through 5-axis milling and turning; 2- and 4-axis wire EDM; 2D and 3D design, surface, and solid modeling; artistic relief cutting, and 2D and 3D routing. CNC Software is a privately owned corporation founded in 1984. The U.S.-based company provides Mastercam CAD/CAM solutions to more than 124,000 installations in 75 countries in industries including mold-making, prototyping, automotive, medical, aerospace, and consumer products. Mastercam runs under Windows 2000 and Windows XP and is compatible with all other CAD/CAM systems. For more information about CNC Software, Inc. and its Mastercam family of products, contact CNC Software, Inc., M - F, 8 AM - 6 PM EST at (800) 228-2877 or (860) 875-5006, 671 Old Post Road, Tolland, CT 06084. Or visit www.mastercam.com.

 

Contact:

Michelle Nemeth

Phone:  (860) 875-5006

Fax:  (860) 872-1565

Michellen@mastercam.com

 


Rating:


Review Article Be the first to review this article
Rand3D

Autodesk University 2017

Featured Video
MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
NVIDIA’s AI Computer Drives AVs
Jobs
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise