Frontier Wind Selects MSC.Software's SimEnterprise Suite to Bring Innovation to Wind Turbine Design

Ability to Produce Better Products, Faster will Help Meet Department of Energy Growth Goals for Wind Energy

SANTA ANA, Calif., - February 9, 2009 - MSC.Software (NASDAQ: MSCS), a leading global provider of enterprise simulation solutions, including simulation software and services, announced that Frontier Wind, LLC has selected several MSC.Software solutions including the SimEnterprise solutions, SimManager and SimXpert, and MD Adams. Through the use of these simulation solutions, Frontier aims to develop more robust products, lower warranty costs and, through lean engineering and best practice re-use, increase profit margins.

The U.S. Department of Energy aims to increase the contribution from Wind Energy to supply 20% of the US electricity needs from its current level of 1.6% by the year 2030. This provides both a huge opportunity as well as a challenge as wind turbine manufacturers face the task of constant innovation under increasing market pressure. To meet these challenges, Frontier Wind has turned to MSC.Software to provide advanced analysis of turbine blades, including composite designs subject to a diverse set of loads and environmental conditions, and to create re-usable templates to accelerate the simulation process using Frontier Wind's best practice methods. This will enable Frontier Wind to reduce physical prototyping and testing requirements and thus, cut development time and costs.

"We strongly believe in simulation's ability to allow us to reduce the substantial costs of physical testing," said John McCoury, Vice President of Engineering, Frontier Wind. "MSC.Software are leaders in their field and their multi-discipline SimEnterprise solutions allow manufacturers to simulate more effectively, efficiently and accurately by taking advantage of best practice capture and reuse with templates, therefore allowing us to optimize design through simulation."

"We are excited to work together with Frontier Wind to meet the ambitious and exciting challenges facing the wind energy industry," said Bill Weyand, Chief Executive Officer, MSC.Software. "Frontier Wind recognizes that in order to meet these challenges, they must innovate and they have selected our products to allow them to use simulation early in the product development process rather than the back end, enabling them to optimize their designs and meet the innovation demands of their industry."

About MSC.Software Corporation
MSC.Software (NASDAQ: MSCS) is a global leader of enterprise simulation solutions, that help companies make money, save time and reduce costs associated with designing and testing manufactured products. MSC.Software works with thousands of companies in hundreds of industries to develop better products faster by utilizing information technology, software, services and systems. MSC.Software employs more than 1000 people in 23 countries. For additional information about MSC.Software's products and services, please visit

Safe Harbor Language
This press release contains forward-looking statements, including statements relating to the features, benefits, capabilities and/or performance of MSC.Software products and services. These statements are subject to risks and uncertainties that could cause actual results to be materially different than expectations. Such risks and uncertainties include, but are not limited to, changes in technology, the end-user computing and analysis environment, implementation and support that meet evolving customer requirements, general industry trends and the impact of competitive products. Furthermore, information provided herein, which is not historical in nature, are forward-looking statements pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. All such forward-looking statements are based largely on management's expectations and are subject to and qualified by risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements. The Company undertakes no duty to update any forward-looking statement to conform the statement to actual results or changes in the Company's expectations.
The MSC.Software corporate logo, Adams, Dytran, Easy5, Laminate Modeler, Marc, MD Adams, MD Nastran, MD Patran, Mentat, MSC, MSC MasterKey, MSC Nastran, Mvision, Patran, SimDesigner, SimEnterprise, SimManager, SimOffice, SimTemplate, SimXpert and Sofy are trademarks or registered trademarks of the MSC.Software Corporation in the United States and/or other countries. NASTRAN is a registered trademark of NASA. All other trademarks belong to their respective owners.


Jennifer Brannon
Senior Manager, Public Relations
(714) 445-3119
Email Contact

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Hexagon’s Recent Ups & Downs Update
Solidworks Product Designer for NASCENT Technology at Charlotte, NC
SYSTEMS INTEGRATOR for Palm Beach County Human Resources at West Palm Beach, FL
Developer-Support-Implementation Engineer for EDA Careers at San Francisco Area, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
PMTS 2017 at Greater Columbus Convention Center Exhibit Halls E, F, & D 400 North High St. Columbus OH - Apr 25 - 27, 2017
AI·GI·CRV Conference 2017 at Edmonton, Alberta Canada - May 16 - 19, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
SolidCAM: Patented Wizard to optimal feeds & speeds

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise