EVE Set to Unveil zFAST at EDSFair 2009

SAN JOSE, Calif.—(BUSINESS WIRE)—January 20, 2009— EVE, the leader in hardware/software co-verification, will exhibit its newly announced zFAST (ZeBu FAst SynThesis) synthesis capabilities during Electronic Design and Solution Fair 2009 (EDSFair2009) January 22-23 at the Pacifico Yokohama in Kanagawa, Japan.

Listed as Nihon EVE K.K. (Booth #503), EVE will offer continuous demonstrations of zFAST for large designs with a bottom-up and top-down approach targeting its ZeBu (for Zero Bugs) emulation systems.

Supporting all three major design languages –– VHDL, Verilog and SystemVerilog ––, zFAST typically runs over one order of magnitude faster than best-in-class field programmable gate array (FPGA) synthesis. It can map large designs with a small increase in area compared to equivalent tools. zFAST can be parallelized on several PCs, further accelerating the synthesis process and enabling design teams to complete a large synthesis job in minutes instead of several hours.

Details about EVE and zFAST can be found at: www.eve-team.com.

For details on the EDSFair 2009, visit: www.edsfair.com/e/.

About EVE

EVE is the worldwide leader in hardware/software co-verification solutions, including hardware description language (HDL) acceleration and extremely fast emulation. EVE products significantly shorten the overall verification cycle of complex integrated circuits and electronic systems designs. Its products also work in conjunction with popular Verilog, SystemVerilog, and VHDL-based software simulators from Synopsys, Cadence Design Systems and Mentor Graphics. Its United States headquarters are in San Jose, Calif. Telephone: (408) 457-3200. Facsimile: (408) 457-3299. Corporate headquarters are in Palaiseau, France. Telephone: (33) 1 64.53.27.30. Fax: (33) 1 64.53.27.40. Email: Email Contact. Website: http://www.eve-team.com.

EVE acknowledges trademarks or registered trademarks of other organizations for their respective products and services.



Contact:

General Manager of EVE USA
Lauro Rizzatti, 408-457-3201
Email Contact
or
Public Relations for EVE
Nanette Collins, 617-437-1822
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise