VISTAGY VIEWPOINT - Quarterly Newsletter

    VISTAGY Viewpoint Newsletter                                     
        A Quarterly Newsletter from VISTAGY, Inc.
September 2008     

In this edition of VISTAGY Viewpoint we focus on the growing need for specialized engineering tools and the challenges of designing composite parts and airframe assemblies.   In Ask the Expert, VISTAGY Founder, President and CEO Steve Luby talks about the value of specialized engineering environments in an exclusive interview with MCADCafé. In Trends in Engineering, we discuss the importance of taking a holistic view of the composite airframe development process.

Then we’re off to the races in our Featured Customer section with Carbo Tech Composites, an Austrian composites engineering firm that used FiberSIM to help develop a complex Formula One chassis. And our Product Tip explains how customizable FiberSIM Actions help engineers adjust to the ever-changing world of composite design and manufacturing.

We hope this issue gets you thinking about ways to improve your composite engineering and airframe assembly processes, and we encourage you to Email Contact with potential story topics and suggestions. Thank you for your continued support.

Best regards,



Webinar Series Event

Enhance Productivity by Taking a Holistic View of Composite Airframe Development

Date: Thursday, September 18
Time: 11:00 ET / 08:00 PT / 15:00 GMT

Register now >>

On the Road with VISTAGY

September 16-18
Aerospace Manufacturing and Automated Fastening Conference & Exhibition
N, Charleston, South Carolina USA

September 21-23
Virtus International 2008 Future Aerospace Congress
Tampa, Florida USA

September 23-24
PLM Road Map 2008
Plymouth, Michigan USA

September 29 - October 1
SME - Tooling for Composites
Seattle, Washington USA

View more events >>

ASK THE EXPERT: VISTAGY Founder Discusses Vision for the Future in MCADCafé Interview

MCAD Cafe CEO InterviewSteve Luby founded VISTAGY in 1991 on the belief that when given the right software tools and access to information, engineers will make better decisions, develop truly innovative products and solve the world’s most vexing engineering problems. Since that time Steve’s vision has been confirmed and VISTAGY has become a leading global provider of specialized engineering software. To learn more about VISTAGY and Steve’s vision and strategy for the future, please listen to his recent interview with MCADCafé. Listen >>

TRENDS IN ENGINEERING: Adopting a Holistic View is Key to Optimizing Composite Airframe Development

Trends in EngineeringWhen composites were first introduced to the commercial aircraft industry, they were used for relatively simple parts. But as the value of composites has become increasingly clear, aerospace firms are now using composites for complex parts as well as entire airframe assemblies. To learn how your firm can adopt effective design methodologies for this new environment, please join us and Steve Green from Butler International on September 18 for a free Webinar entitled, “Enhance Productivity by Taking a Holistic View of Composite Airframe Development. Read more >>

FEATURED CUSTOMER: Carbo Tech Hits Mark for Developing Complex F1 Chassis with FiberSIM® VISTAGY  Featured  Customer

Carbo Tech Composites, one of the leading manufacturers of composite parts for Formula One racing, was faced with the task of developing a highly complex single-part chassis on a daunting schedule. Learn how FiberSIM helped Carbo Tech compress the product development cycle and meet the performance requirements by streamlining its engineering process. Read more >>

Product Tips:   FiberSIM ®
FiberSIM Actions extend the functionality of the product beyond its core competency. Learn how Actions enable engineers to adapt and succeed in a changing composite design and manufacturing environment.

Partner with VISTAGY
Find out how we work with other companies to develop industry-leading software and solutions.


Share with a Friend
Do you know someone who would benefit from this information?
Click below to share.

Share >>

Contact Us

200 Fifth Avenue
Waltham, MA 02451 USA
Tel: +1.781.250.6800
Fax: +1.781.250.6801

Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Hexagon’s Recent Ups & Downs Update
Solidworks Product Designer for NASCENT Technology at Charlotte, NC
Developer-Support-Implementation Engineer for EDA Careers at San Francisco Area, CA
SYSTEMS INTEGRATOR for Palm Beach County Human Resources at West Palm Beach, FL
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
AI·GI·CRV Conference 2017 at Edmonton, Alberta Canada - May 16 - 19, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
LiveWorx Tech Conf 2017 at Boston MA - May 22 - 25, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise