GibbsCAM Post Processors Available for Mori Seiki's New NZ Series

Collaboration With Mori Seiki Optimizes GibbsCAM for New High-Efficiency Mori Seiki NZ Series Machines

MOORPARK, California, September 3 /PRNewswire-FirstCall/ -- Cimatron Limited (NASDAQ: CIMT), a leading provider of integrated CAD/CAM solutions for the toolmaking and manufacturing industries announced today the release of GibbsCAM post processors developed for Mori Seiki's NZ series of machine tools. GibbsCAM's posted output effectively supports the advanced capabilities of these multi-tasking machine tools, because of a collaborative effort with Mori Seiki. As competitive pressures grow, so does the market demand for high-efficiency mass production machine tools like the Mori Seiki NZ line which can dramatically reduce machining time.

"As the complexity of today's advanced machine tools increases, sophisticated post processors are required to program them effectively," explains Bill Gibbs, founder and CEO of Gibbs and Associates. "Working directly with Mori Seiki engineers, we were able to acquire the expertise needed to develop and validate these post processors for their NZ Series."

The Mori Seiki NZ series of machine tools are ideally suited for mass-production machining. The NZ series machines can be configured with up to three turrets, all using Mori Seiki's BMT(TM) (Built-in Motor Turret) technology. By placing the motor inside the turret, heat generation and vibration are kept to a minimum and transmission efficiency is improved. Cutting performance, speed and precision are also significantly increased. The new NZ Series of multi-axes machines offers not only turning, but also excellent milling with the Y-axis. With the longest Y-axis stroke in its class, it achieves high-precision, high efficiency machining. In addition to developing post processors for the Mori Seiki NZ series line, GibbsCAM post processors are also available for Mori Seiki's NMV series of 5-Axis machine tools.

For more information about GibbsCAM or to locate your local GibbsCAM Reseller, go to, call 1-800-654-9399, or email Email Contact. For more information about Mori Seiki and their line of machine tools, visit

About Gibbs and Associates and GibbsCAM

For over twenty years, Gibbs and Associates has been a leader in providing cutting edge CAD/CAM technology, while maintaining its signature ease-of-use and productivity. Powerfully Simple, Simply Powerful is the guiding philosophy at Gibbs. Gibbs believes in empowering the NC programmer, machinist, and manufacturing engineer, not eliminating them. Gibbs' goal is to introduce manufacturers to new technologies and new ways of working that makes their machining easier and their businesses more profitable. To achieve this goal, Gibbs creates tools that are naturally intuitive, graphically interactive, extremely visual, associative, and just plain enjoyable to use. Gibbs provides a total quality solution with the service and support successful customers require.

The current GibbsCAM product line supports 2- through 5-axis milling, turning, mill/turning, multi-task simultaneous machining and wire-EDM. GibbsCAM also provides fully integrated manufacturing modeling capabilities that include 2D, 2.5D, 3D wireframe, surface, and solid modeling. GibbsCAM has received Microsoft's "Designed for Windows XP/2000" and "Works with Windows Vista" certifications. GibbsCAM's data exchange capabilities are able to access the broadest range of native and industry standard CAD data formats. GibbsCAM is certified under the Autodesk Inventor Certified Application Program, is a Solid Edge Certified Select Product, and is a SolidWorks Certified CAM Product. GibbsCAM is either offered or endorsed by a number of leading worldwide control and machine tool manufacturers, including GE Fanuc, Infimatic, Siemens, Doosan Infracore, Haas, Index, MAG Fadal, Mazak, Mitsubishi, Mori Seiki, and Tornos. Gibbs and Associates distributes its products worldwide through a network of international Resellers.

In January 2008, Gibbs and Associates merged with Cimatron Ltd, and is now operating as a wholly owned subsidiary. For more information about Gibbs and Associates and its CAM software packages, call 1-800-654-9399, or visit the company on-line at

About Cimatron

With over 25 years of experience and more than 40,000 installations worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions for mold, tool and die makers as well as manufacturers of discrete parts. Cimatron is committed to providing comprehensive, cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time.

The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions for mold design, die design, electrodes design, 2.5 to 5 axes milling, wire EDM, turn, Mill-turn, rotary milling, multi-task machining, and tombstone machining. Cimatron's subsidiaries and extensive distribution network serve and support customers in the automotive, aerospace, medical, consumer plastics, electronics, and other industries in over 40 countries worldwide.

Cimatron is publicly traded on the NASDAQ exchange under the symbol CIMT. For more information, please visit the company web site at:

The Gibbs logo, GibbsCAM, GibbsCAM logo, Virtual Gibbs, Gibbs SFP, SolidSurfacer, MTM and "Powerfully Simple. Simply Powerful." are either trademark(s) or registered trademark(s) of Gibbs and Associates in the United States and/or other countries. Microsoft, Windows, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners.

Safe Harbor Statement

This press release includes forward looking statements, within the meaning of the Private Securities Litigation Reform Act Of 1995, which are subject to risk and uncertainties that could cause actual results to differ materially from those anticipated. Such statements may relate to the company's plans, objectives and expected financial and operating results. The words "may," "could," "would," "will," "believe," "anticipate," "estimate," "expect," "intend," "plan," and similar expressions or variations thereof are intended to identify forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of the future performance and involve risks and uncertainties, many of which are beyond the company's ability to control. The risks and uncertainties that may affect forward looking statements include, but are not limited to: currency fluctuations, global economic and political conditions, marketing demand for Gibbs and Associates or Cimatron products and services, long sales cycle, new product development, assimilating future acquisitions, maintaining relationships with customers and partners, and increased competition. For more details about the risks and uncertainties of the business, refer to the Cimatron's filings with the Securities and Exchanges Commission. The company cannot assess the impact of or the extent to which any single factor or risk, or combination of them, may cause. Gibbs and Associates and Cimatron undertake no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise.

    For More Information Contact:

    Yvonne Anderson
    Gibbs and Associates
    Phone: +1(805)-523-0004
    Fax: +1-(805)-523-0006

    Ilan Erez
    Chief Financial Officer
    Cimatron Ltd.
    Phone: +972-3-531-2121

    Yael Nevat
    Phone: +972-3-611-4466

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
GIS Analyst for City of Elk Grove at Elk Grove, CA
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise