TAW sees CAM software pay for itself in four months.

Massive material and time savings deliver a competitive edge.

August 19, 2008 -- TAW Inc, based in Tampa, Florida, provide metal fabrication services, specializing in the electrical distribution and control equipment sectors. After the purchase of a Cincinnati laser in 2005 to compliment their Amada punch press problems became apparent, with two incompatible systems in operation that provided limited functionality.

Robert Huneke, Engineering Manager commented; “With the original system, programming the Amada was difficult, with only one person being able to use it. This created a massive bottleneck, with any change to either a part or a nest having to go through engineering. Furthermore I refused to use the auto-tooling functions as they were complex and rarely worked as expected. Simple functions such as prompting to save on exit simply weren't there, so we often lost changes to parts. Neither software could drive the other machine, so we had to reprogram parts from scratch if we could not run them on the intended machine.”

After considering upgrading their Amada software they decided to evaluate the market; “I quickly discounted upgrading the current product and did a search online for alternative systems. I briefly investigated a couple of others before settling for JETCAM.”

In May 2006 two licenses of JETCAM Expert with Free Form High Performance Nesting (FFHPN) were installed. Floating licenses were installed to allow two operators to work concurrently over the network. Training was provided and completed in a single day, with staff able to provide complete downstream training for new staff.

Immediately, the programming requirement was reduced by 75%. Parts could be imported and dynamically tooled, with functions such as applying tabs to corners automatically As a result the company’s entire programming methodology has changed, with shop floor operators all able to create/modify parts or nests, thus removing the bottleneck of a single programmer. Jobs can also be seamlessly moved between the punch and the laser depending on capacity, with JETCAM intelligently applying method-specific technology such as lead-ins, common line cutting or tabs to parts accordingly. Robert noted; “From day one JETCAM was set up to correctly apply tabs - I've only ever manually set up one tab when cutting plastic once in two years.”

The company plans to implement JETCAM’s Remote Control Processing (RCP) module to remove the remaining 25% programming time by completely automating the import, tooling, nesting, NC code generation and reporting processes. SolidWorks generates the CAD files that can be imported into JETCAM, while Visual Basic scripts running through Excel automatically populate JETCAM’s orders lists. RCP will then automate the entire process. Robert added;”We decided to run the system in semi-automatic mode initially and then move to full automation.”

TAW also saw a 20% reduction in material due to FFHPN’s ability to nest over a maximum specified length of time, coupled with other material saving features such as common line cutting.

A maintenance contract is also in place, allowing TAW to immediately download the latest version. Beneficial functions in later versions include SolidWorks integration, remnant sheet management, enhanced sequencing and tool teach mode, allowing JETCAM to learn a user’s preferred tooling selection on particular contours and intelligently apply this logic automatically on future parts.

With new parts and nests being created daily, automating the process provides considerable savings, with TAW seeing a return on investment in only four months.  Robert concluded; “We've had great support from the local reseller, with any questions resolved the same day. Normally when you bring in new products you meet with resistance, but all of the shopfloor and engineering staff like JETCAM because of the ease of use and the time it saves.”

Benefits Achieved:

  • Return on investment in just four months
  • 20% reduction in material waste
  • Reduction in programming time of 75%
  • Eliminated the bottleneck of a single programmer
  • All shopfloor staff can now amend parts and make nests
  • Ability to move jobs between machines seamlessly
  • Replaced two CAM systems with one
  • Using floating license capability for access to the system from any PC on the network
  • Plan to totally automate programming through RCP
  • Operators trained in a single day
  • Local dealer excellent pre and post sales support

Hi-res digital images are available for immediate download at www.jetcam.com/images/cs_taw_pics.zip (11MB).

About JETCAM International
JETCAM International has been developing and distributing its JETCAM Expert range of CADCAM software since 1986. In use in over 70 countries worldwide, JETCAM Expert software supports virtually every CNC punching, laser, plasma, routing, waterjet and flatbed cutting machine available today, allowing users to program any combination of CNC machines with a single CAM system.

For more information please contact Martin Bailey, Marketing Manager for JETCAM at Email Contact.

Contact information:

JETCAM International
Terrasses du Port
2 Avenue des Ligures
MC98000 Monaco

Tel: +44 (0)870 760 6469
Email Contact
Web: www.jetcam.com


NestOne Solutions LLC
3796 Thornbrooke Court
Duluth, GA 30097

Tel: 800 790 1640
Email Contact

Web: www.nestonesolutions.com



Review Article Be the first to review this article


Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
APSX Bringing Injection Molding To The Desktop
Inside Sales for SolidCAM at Newtown, PA
Director of Mechanical Engineering for Velodyne LIDAR at Morgan Hill, CA
Data Scientist for University of Utah at Salt Lake City, UT
Architect for North County Transit District at Oceanside, CA
Architetural Project Manager for DRA Architects at Irvine, CA
Sr. GIS Technical Analyst for Southern California Edison SCE Transmission and Distribution Organization at Rosemead, CA
Upcoming Events
DriveWorks World at The Barley Store Laskey Lane Thelwall Cheshire United Kingdom - Mar 6 - 9, 2017
JEC World 2017 at Paris Nord Villepinte Exhibition Centre Paris France - Mar 14 - 16, 2017
SOLIDWORKS funding event – Leicester at The National Space Centre, Exploration Dr, Leicester, LE4 5NS Leicester United Kingdom - Mar 17, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise