Korea Institute of Machinery & Materials Makes Maglev Train Simulation a Reality With LMS Virtual.Lab

Leuven, Belgium – August 6, 2008 – LMS, the engineering innovation company, is proud to announce their successful collaboration with KIMM (Korea Institute of Machinery & Materials) regarding the development of the first simulated maglev train in the world. The team at KIMM used LMS Virtual.Lab to create a highly realistic simulation that could handle mission critical factors like guideway specification costs as well as simulating the contact-less interaction between the vehicle and the flexible guideway.

Korea’s €285 million urban maglev program kicked off in 2006. KIMM, the government-run science and technology research institute, is responsible for maglev development and system integration. The project has already reached its launch stage in just two short years thanks to a team totaling more than 300 researchers and engineers from 26 industrial, academic and research institutes. If all goes according to plan, the Korean maglev train will go into commercial service in 2013.

In the early project stages, Dr. Hyungsuk Han, Senior Researcher, and his team at KIMM conducted a significant amount of research to evaluate and improve existing maglev performance. To do this, Dr. Han and his team turned to LMS Virtual.Lab to help develop a simulated maglev model – the first simulated maglev in the world.

“The fact that maglev simulation requires contact-less interaction between the vehicle and the flexible guideway was the primary challenge. We considered other solutions, but concluded that only LMS Virtual.Lab Motion permitted us to successfully simulate the crucial interaction between the vehicle’s electromagnets and the guideway – an extremely complicated procedure,” stated Dr. Han.

To validate the world’s first maglev simulation, KIMM counted on LMS Test.Lab to confirm the accuracy of the calculations against the actual maglev prototype model, the UTM2. KIMM engineers measured the dynamic responses like the Frequency Response Function (FRF) of the secondary suspension and mission-critical electromagnet control system of the actual maglev prototype and used this information to crosscheck the simulation model’s accuracy.

Thanks to the success of the simulated urban maglev using the LMS Virtual.Lab platform and the validation of the simulated results with LMS Test.Lab, KIMM gave the green light to launch the first official Korean maglev in April 2008.

“LMS Virtual.Lab was the only simulation solution that allowed us to create the most realistic simulation possible,” concluded Dr. Han. “The fact that the model could handle a mission critical factor like guideway specification costs really made a difference. Since the guideway structure is expected to take between 60% and 80% of the current $450 million budget, it is essential that the simulation study covered the economic side of the project as well. This contributed to the successful launch of the Korean maglev.”

About LMS:
LMS is an engineering innovation partner for companies in the automotive, aerospace and other advanced manufacturing industries. With approximately 30 years of experience, LMS helps customers get better products to market faster and turn superior process efficiency into key competitive advantages. With a unique combination of 1D and 3D simulation software, testing systems and engineering services, LMS tunes into mission critical engineering attributes, ranging from system dynamics, structural integrity and sound quality to durability, safety and power consumption. With multi-domain solutions for thermal, fluid dynamics, electrical and mechanical system behavior, LMS can address the complex engineering challenges associated with intelligent system design. Thanks to our technology and dedicated people, LMS has become the partner of choice of more than 5,000 manufacturing companies worldwide. LMS is certified to ISO9001:2000 quality standards and operates through a network of subsidiaries and representatives in key locations around the world.

For more information on LMS, visit www.lmsintl.com

LMS Press Contacts:
Bruno Massa
Tel +32 16 384 200
Email Contact

Germany: France: Italy:
Svenja Bödecker Myriam Degroux Alessandra Fabiani
Tel +49 (0) 7152 979 79 18 Tel + 33 1 69 35 19 20 Tel +39 0321 44 50 11
Email Contact Email Contact Email Contact

United States:
Marc Marroquin
Tel +1 248 502 2385
Email Contact

Japan: China: Korea:
Maki Hisano Susan Wu Hyo Joo Choi
Tel +81 45 478 4800 Tel +86 10 8497 6463 Tel +82 2 571 7246 206
Email Contact Email Contact Email Contact

Robin Nicotri
LMS N America
5755 New King Street
Troy, MI 48098
Phone: 248-952-5664
Fax: 248-952-1610
E-mail: Email Contact


Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise