New WorkNC module optimizes feedrates to cut machining times by up to 20%

July 7, 2008 - Sescoi is bringing its latest technology to the USA market to further reduce machining times for complex parts, molds and dies. Its CAM/CAD software, WorkNC G3, already automatically generates optimized roughing and finishing toolpaths for 2 to through to 5-axis machining applications. Now, the new NCspeed module, developed by Formtec and fully integrated into WorkNC, can produce additional cycle time reductions of up to 20% using its proven technology.                                   

Unlike other CNC feedrate optimizers that simply look at the programmed points of the CNC file and search for direction changes, NCspeed uses a computer generated stock model that is updated dynamically and continuously. This more advanced method allows the NCspeed module to calculate the load and thus forces generated on the cutting tool. NCspeed will then adjust the feedrates up during conditions of a light cutter load. Conversely, for cutter safety, NCspeed can lower feedrates where appropriate, such as during areas of high cutter loads.

Furthermore, by keeping tool loads as constant as possible, NCspeed will help engineers to achieve the best possible cutting conditions across the whole job, which will have a positive impact on accuracy and the quality of the surface finish. In particular, the performance of small diameter and long cutters will benefit from optimization with NCspeed. By avoiding excessive load conditions and endeavoring to keep the volume of material being cut the same at all times, cutter deflection will be minimized, tool life increased, excessive vibration and chatter eliminated and cutter breakage avoided.

The software also checks for tool engagement with the material, maximizing movements at rapid feed where the cutter is out of the material, and shortening the overall length of rapid toolpaths where it is safe to do so.

NCspeed is most effective when machining hard or tough materials, however, even free cutting materials can show significant savings in tooling costs and cycle times, making it a worthwhile investment for every machine shop.

Jeff Jaje of Sescoi Inc said, “We are always trying to help our customers to improve the productivity they get from using WorkNC. The new NCspeed module is a powerful addition which will enable American engineers to make major reductions in manufacturing costs through faster machining and longer tool life.”

 

About Sescoi

For over 20 years, Sescoi has been developing software solutions renown for their quality, reliability, ease of use, and automatic features, as well as for world-class technical support and service.

Sescoi has established sales and support offices across the United States, Europe and Asia in order to serve thousands of local and international customers from a range of industries.

Sescoi's software solutions include:

  • WorkNC, an automatic CAM/CAD solution for 2 to 5-axis milling,
  • WorkNC-CAD, a uniform CAD solution for the entire manufacturing process
  • WorkXPlore 3D,  an advanced 3D data visualization, interrogation and analysis solution
  • WorkPLAN Enterprise, a new generation ERP solution for custom manufacturers
  • MyWorkPLAN, a cost effective and easy to use job management system.

With many years' business, engineering and software development experience, Sescoi understands  customers' requirements, helps them master the challenges of new software implementation and build their business long-term.

About Formtec

FORMTEC, founded in 1998, is a full service company providing special engineering services in the field of mold and die machining.  Standard services offered by FORMTEC cover CAD/CAM programming, digitizing services, high speed machining of molds and dies, development of software and consulting services.

CONTACT

 

Mortimer PR Services

Knockalls Farm, Mitcheldean, Gloucestershire, GL17 0DP

Tel  ++44 (0)1594 542578    Email Contact Email Contact 

 


Rating:


Review Article Be the first to review this article
HP

SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
APSX Bringing Injection Molding To The Desktop
Jobs
Inside Sales for SolidCAM at Newtown, PA
Director of Mechanical Engineering for Velodyne LIDAR at Morgan Hill, CA
Database Specialist for MDA Information Systems LLC at Gaithersburg, MD
Architetural Project Manager for DRA Architects at Irvine, CA
Data Scientist for University of Utah at Salt Lake City, UT
Sr. GIS Technical Analyst for Southern California Edison SCE Transmission and Distribution Organization at Rosemead, CA
Upcoming Events
DriveWorks World at The Barley Store Laskey Lane Thelwall Cheshire United Kingdom - Mar 6 - 9, 2017
JEC World 2017 at Paris Nord Villepinte Exhibition Centre Paris France - Mar 14 - 16, 2017
SOLIDWORKS funding event – Leicester at The National Space Centre, Exploration Dr, Leicester, LE4 5NS Leicester United Kingdom - Mar 17, 2017
ACE 2017 Nashville at Nashville TN - Mar 21 - 23, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise