ALGOR DesignCheck Provides Integrated Simulation for Pro/ENGINEER Users

PITTSBURGH, PA -- (MARKET WIRE) -- Jun 03, 2008 -- ALGOR, Inc., a leading provider of design, analysis and simulation software, announced the availability of ALGOR DesignCheck -- a first-pass, fully integrated simulation tool -- for users of Pro/ENGINEER®, the integrated 3-D CAD/CAM/CAE solution from Parametric Technology Corporation (PTC) of Needham, Massachusetts. Expanding upon the existing technology partnership between ALGOR and PTC, ALGOR DesignCheck is free, time-limited finite element analysis (FEA) software that allows engineers and designers to perform linear static stress analysis of single-part CAD models. With ALGOR DesignCheck, Pro/ENGINEER® users can virtually test the behavior of product designs, speed up time to market and make better, safer products at a lower cost.

ALGOR software's easy-to-use single user interface, FEMPRO®, provides direct CAD/CAE data exchange and full associativity with most CAD solid modelers, including Pro/ENGINEER. This allows engineers to simply choose the analysis tools they need, giving them access to ALGOR's wide range of simulation capabilities including: static stress and Mechanical Event Simulation (MES) with linear and nonlinear material models; linear dynamics; fatigue; CFD including steady-state and transient heat transfer, steady and unsteady fluid flow and mass transfer; electrostatics; full multiphysics; and piping.

"ALGOR DesignCheck allows Pro/ENGINEER users to perform valuable, production-quality work and experience the benefits of incorporating FEA into the design process," said Bob Williams, ALGOR Product Manager. "After getting started with ALGOR DesignCheck, Pro/ENGINEER users can easily upgrade their ALGOR license to include additional analysis tools and support for assemblies. After upgrading, they will enjoy all the same features they have used with ALGOR DesignCheck including the same easy-to-use interface so they don't need to learn a new interface or process in order to take advantage of a broader range of analysis types."

"PTC's Partner Advantage Program is designed to create business opportunities and revenue growth for both companies while providing optimal solutions for customers," said Andy Barlow, senior director of business development, PTC. "With the availability of ALGOR DesignCheck, ALGOR continues to provide complementary solutions to our product development system -- enabling Pro/ENGINEER users to increase productivity."

For more information, visit www.ALGOR.com. To see a free demonstration, view "ALGOR FEA for CAD Featuring Pro/ENGINEER" at www.eTechLearning.com. To download the free, time-limited ALGOR DesignCheck software, visit ProEDesignCheck.ALGOR.com.

About ALGOR, Inc.

ALGOR, Inc. provides cost-effective solutions for design, analysis and simulation and enables engineers to virtually test and predict real-world behavior of new and existing product designs, speed up time to market and make better, safer products at a lower cost. The company serves more than 20,000 customers in over 95 countries in organizations such as 3M, The Boeing Company, Delphi Corporation, DuPont, General Electric Company, General Motors Corporation, Goodrich Corporation, Hewlett-Packard Company, IBM Corporation and NASA. Partnerships with other leading software companies offer data exchange with products from all major CAD vendors. Educational support and customer service includes the use of Internet audio/video technology for distance learning and free, live software demonstrations. For additional information, please visit our website at www.ALGOR.com.

PTC and Pro/ENGINEER are trademarks or registered trademarks of Parametric Technology Corporation or its subsidiaries in the United States and in other countries.

CONTACT:
Julie Halapchuk
ALGOR, Inc.
1.412.967.2700

Email Contact

FOR PHOTOGRAPHS:  Go to 
www.ALGOR.com/photographs.





Review Article Be the first to review this article
Rand3D

SolidCAM: SolidCAM SEE IT LIVE

MCAD Corporate Newsletter
rss feed
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
What’s Next: 2018 MCADCafe Editorial Calendar
Jobs
Currently No Featured Jobs
Upcoming Events
Design for Metal Additive Manufacturing Short Course at Revere Hotel Boston Common 200 Stuart St Boston MA - Nov 27 - 28, 2017
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise