GibbsCAM Post Processors for Mori Seiki NMV Line Approved

Collaboration Between The Two Companies Ensures That GibbsCAM Supports 5-Axis Programming

MOORPARK, California, May 27 /PRNewswire-FirstCall/ -- Cimatron Limited (NASDAQ: CIMT), a leading provider of integrated CAD/CAM solutions for the toolmaking and manufacturing industries, announced today that the set of its GibbsCAM(R) product's post processors that was developed for Mori Seiki's NMV line of machine tools has been validated by Mori Seiki. This collaborative effort between the two companies ensures that GibbsCAM's posted output supports the 5-axis simultaneous capabilities of these machine tools. As competitive pressures grow, the market demand for 5-axis simultaneous machine tools is also growing as they significantly reduce setups and improve overall part quality.

"Accurate post processors are still the Achilles tendons of today's advanced machine tools," explains Bill Gibbs, founder and CEO of Gibbs and Associates. "This is certainly the case when dealing with 5-axis machine tools. Working directly with Mori Seiki DTL, we were able to significantly reduce the time it took to develop the set of post processors for their NMV series."

The Mori Seiki NMV series of machine tools are high-precision, 5-axis control vertical machining centers. Using Mori Seiki's DCG(R) (Driven at the Center of Gravity) technology, vibration is controlled allowing for high precision at high speeds. DCG virtually eliminates vibration ensuring a high quality surface finish, outstanding acceleration performance and improved roundness. DCG along with Mori Seiki's DDM(TM) (Direct Drive Motor), Table-in-Table Construction and ORC(TM) (Octagonal Ram Construction) provide the NMV series with the power and stability required for today's demanding machining applications.

In addition to developing post processors for the Mori Seiki NMV line, Gibbs has also developed accurate machine models of the NMV8000 DCG and NMV5000 DCG for use with GibbsCAM's Machine Simulation capability. Machine Simulation allows program motions to be fully simulated to identify potential programming errors which would result in expensive machine tool crashes on the shop floor.

For more information about GibbsCAM or to locate your local GibbsCAM Reseller, go to http://www.GibbsCAM.com, call +1-800-654-9399, or email Email Contact. For more information about Mori Seiki and their line of machine tools, visit http://www.MoriSeiki.com.

About Gibbs and Associates and GibbsCAM

For over twenty years, Gibbs and Associates has been a leader in providing cutting edge CAD/CAM technology, while maintaining its signature ease-of-use and productivity. Powerfully Simple, Simply Powerful is the guiding philosophy at Gibbs. Gibbs believes in empowering the NC programmer, machinist, and manufacturing engineer, not eliminating them. Gibbs' goal is to introduce manufacturers to new technologies and new ways of working that makes their machining easier and their businesses more profitable. To achieve this goal, Gibbs creates tools that are naturally intuitive, graphically interactive, extremely visual, associative, and just plain enjoyable to use. Gibbs provides a total quality solution with the service and support successful customers require.

The current GibbsCAM product line supports 2- through 5-axis milling, turning, mill/turning, multi-task simultaneous machining and wire-EDM. GibbsCAM also provides fully integrated manufacturing modeling capabilities that include 2D, 2.5D, 3D wireframe, surface, and solid modeling. GibbsCAM has received Microsoft's "Designed for Windows XP/2000" and "Works with Windows Vista" certifications. GibbsCAM's data exchange capabilities are able to access the broadest range of native and industry standard CAD data formats. GibbsCAM is certified under the Autodesk Inventor Certified Application Program, is a Solid Edge Certified Select Product, and is a SolidWorks Certified CAM Product. GibbsCAM is either offered or endorsed by a number of leading worldwide control and machine tool manufacturers, including GE Fanuc, Infimatic, Siemens, Doosan Infracore, Haas, Index, MAG Fadal, Mazak, Mitsubishi, Mori Seiki, and Tornos. Gibbs and Associates distributes its products worldwide through a network of international Resellers.

In January 2008, Gibbs and Associates merged with Cimatron Ltd, and is now operating as a wholly owned subsidiary. For more information about Gibbs and Associates and its CAM software packages, call 1-800-654-9399, or visit the company on-line at http://www.GibbsCAM.com.

About Cimatron

With over 25 years of experience and more than 40,000 installations worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions for mold, tool and die makers as well as manufacturers of discrete parts. Cimatron is committed to providing comprehensive, cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time.

The Cimatron product line includes the CimatronE and GibbsCAM brands with solutions for mold design, die design, electrodes design, 2.5 to 5 axes milling, wire EDM, turn, Mill-turn, rotary milling, multi-task machining, and tombstone machining. Cimatron's subsidiaries and extensive distribution network serve and support customers in the automotive, aerospace, medical, consumer plastics, electronics, and other industries in over 40 countries worldwide.

Cimatron is publicly traded on the NASDAQ exchange under the symbol CIMT. For more information, please visit the company web site at: http://www.cimatron.com.

The Gibbs logo, GibbsCAM, GibbsCAM logo, Virtual Gibbs, Gibbs SFP, SolidSurfacer, MTM and "Powerfully Simple. Simply Powerful." are either trademark(s) or registered trademark(s) of Gibbs and Associates in the United States and/or other countries. Microsoft, Windows, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners.

Safe Harbor Statement

This press release includes forward looking statements, within the meaning of the Private Securities Litigation Reform Act Of 1995, which are subject to risk and uncertainties that could cause actual results to differ materially from those anticipated. Such statements may relate to the company's plans, objectives and expected financial and operating results. The words "may," "could," "would," "will," "believe," "anticipate," "estimate," "expect," "intend," "plan," and similar expressions or variations thereof are intended to identify forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of the future performance and involve risks and uncertainties, many of which are beyond the company's ability to control. The risks and uncertainties that may affect forward looking statements include, but are not limited to: currency fluctuations, global economic and political conditions, marketing demand for Gibbs and Associates or Cimatron products and services, long sales cycle, new product development, assimilating future acquisitions, maintaining relationships with customers and partners, and increased competition. For more details about the risks and uncertainties of the business, refer to the Cimatron's filings with the Securities and Exchanges Commission. The company cannot assess the impact of or the extent to which any single factor or risk, or combination of them, may cause. Gibbs and Associates and Cimatron undertake no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise.

    EDITOR'S NOTE: Electronic image and caption available upon request.

    For More Information Contact:
    Yvonne Anderson
    Gibbs and Associates
    Phone:+1(805)523-0004
    Fax: +1(805)523-0006
    Email: Yvonne.Anderson@GibbsCAM.com

    Ilan Erez
    Chief Financial Officer
    Cimatron Ltd.
    Phone: +972-3-531-2121
    Email: ilane@cimatron.com

    Yael Nevat
    Commitment-IR.com
    Phone: +972-3-611-4466
    +972-50-762-6215
    Email: yael@commitment-IR.com




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise