North American Semiconductor Equipment Industry Posts April 2008 Book-to-Bill Ratio of 0.81

SAN JOSE, CA -- (MARKET WIRE) -- May 20, 2008 -- North America-based manufacturers of semiconductor equipment posted $1.07 billion in orders in April 2008 (three-month average basis) and a book-to-bill ratio of 0.81 according to the April 2008 Book-to-Bill Report published today by SEMI. A book-to-bill of 0.81 means that $81 worth of orders were received for every $100 of product billed for the month.

The three-month average of worldwide bookings in April 2008 was $1.07 billion. The bookings figure is about eight percent less than the final March 2008 level of $1.17 billion, and almost 32 percent less than the $1.57 billion in orders posted in April 2007.

The three-month average of worldwide billings in April 2008 was $1.32 billion. The billings figure is about two percent less than the final March 2008 level of $1.34 billion, and about 17 percent less than the April 2007 billings level of $1.59 billion.

"Relatively flat bookings and billings for North American semiconductor equipment reflect the continued conservative mood of the industry," said Stanley T. Myers, president and CEO of SEMI. "A number of fab projects have been put on-hold or delayed until 2009, and the current 2008 equipment data reflect this trend."

The SEMI book-to-bill is a ratio of three-month moving averages of worldwide bookings and billings for North American-based semiconductor equipment manufacturers. Billings and bookings figures are in millions of U.S. dollars.

                       Billings             Bookings
                      (Three-month avg.)   (Three-month avg.)  Book-to-Bill

November 2007          1,383.2              1,130.7            0.82
December 2007          1,361.7              1,156.3            0.85
January 2008           1,279.3              1,141.0            0.89
February 2008          1,310.8              1,205.4            0.92
March 2008 (final)     1,344.9              1,165.6            0.87
April 2008 (prelim.)   1,318.9              1,073.8            0.81

Source: SEMI May 2008

The data contained in this release was compiled by David Powell, Inc., an independent financial services firm, without audit, from data submitted directly by the participants. SEMI and David Powell, Inc. assume no responsibility for the accuracy of the underlying data.

The data are contained in a monthly Book-to-Bill Report published by SEMI. The report tracks billings and bookings worldwide of North American-headquartered manufacturers of equipment used to manufacture semiconductor devices, not billings and bookings of the chips themselves.

SEMI is the global industry association serving the manufacturing supply chains for the microelectronic, display and photovoltaic industries. SEMI member companies are the engine of the future, enabling smarter, faster and more economical products that improve our lives. Since 1970, SEMI has been committed to helping members grow more profitably, create new markets and meet common industry challenges. SEMI maintains offices in Austin, Beijing, Brussels, Hsinchu, Moscow, San Jose, Seoul, Shanghai, Singapore, Tokyo, and Washington, D.C. For more information, visit www.semi.org.

Editors Note:

Next SEMI Book-to-Bill: June 19, 2008; 3:00 p.m. PDT

For information on SEAJ Book-to-Bill Report, visit www.seaj.or.jp

Association Contacts
Dan Tracy
SEMI
Tel: 1.408.943.7987
E-mail: 
Email Contact

Scott Smith
SEMI
Tel: 1.408.943.7957
E-mail: 
Email Contact





Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Hexagon’s Recent Ups & Downs Update
Jobs
Solidworks Product Designer for NASCENT Technology at Charlotte, NC
Developer-Support-Implementation Engineer for EDA Careers at San Francisco Area, CA
SYSTEMS INTEGRATOR for Palm Beach County Human Resources at West Palm Beach, FL
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
Engineer 3D! Training + Technology Conference at Hyatt Regency Milwaukee 333 West Kilbourn Avenue Milwaukee WI - Apr 25 - 26, 2017
PMTS 2017 at Greater Columbus Convention Center Exhibit Halls E, F, & D 400 North High St. Columbus OH - Apr 25 - 27, 2017
AI·GI·CRV Conference 2017 at Edmonton, Alberta Canada - May 16 - 19, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise