Significant time gains with TopSolid'Cam

Missler Software is very happy to announce significant time gains for TopSolid'Cam users in the latest version of its CAM module.
 Thanks to the optimisation of certain algorithms together with the new possibilitie offered by instruction sets available in Intel processors, TopSolid'Cam can now offer significantly reduced calculation times for 3D operations. Here is a summary of just some of the resulting time gains (we have compared the most recent version of TopSolid'Cam 2008 with previous versions):

  • Machining on parallel planes: Between 1.5 to 1.8 times faster

  • Constant crete machining: Between 1.5 to 2 times faster

  • Z-Level machining: Between 2 to 2.5 times faster

  • Revolved parallel plane machining: Between 1.5 to 2.5 times faster

  • Roughing: Between 1.3 to 1.5 times faster

  • Residual material removal: Between 1.2 to 1.6 times faster

Note:
A result of 2 indicates that the calculation is done twice as fast. Thanks to the latest version of TopSolid'Cam it now only takes 1 hour (instead of 2 hours) to calculate constant crete machining.

The above time variations are due to the different processors tested and can also be accounted for by taking into account the age of the processors and the instruction sets of the processors. TopSolid'Cam operators need to work on a processor that can manage SSE2, SSE3 and SSSE3 instruction sets to benefit from the aforementioned time gains.

 





Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise