Boeing Reconfirms Acceptability of Painted Landing Gear Truck Beam Inner Surfaces

WOOD DALE, Ill., April 14 /PRNewswire-FirstCall/ -- AAR CORP. (NYSE: AIR) announced today that The Boeing Company has issued a Multi Operator Message ("MOM") to its 707, 747, 757 and 767 customers, dated April 8, 2008, referencing the FAA South Florida FSDO notice (UPN No. 2008-S2008 0110024) issued on March 25, 2008 ("FAA Notice") regarding enamel paint applied by AAR to the inside surfaces of the respective aircraft main landing gear ("MGL") truck beams.

The MOM reconfirms the enamel applied by AAR as a top coat to the inner diameter of landing gear truck beams "...to be equivalent to drawing finish requirements and can be considered acceptable subject to all other standard overhaul processes and applicable CMM [Component Maintenance Manual] instructions being followed at the time of the overhaul."

Boeing also stated in the MOM that while the preferred finishing method described in the applicable truck beam CMMs for 747, 757 and 767 aircraft does not require an enamel top coat "...the presence of enamel top coat is not detrimental and is equivalent to the design finish and hence type design." for these aircraft models. They further stated that "For all 707 model aircraft, the design finish scheme [described in the 707 CMM] includes both primer and enamel paint in the inner diameter of the truck beam". Accordingly, a top coat of enamel as used by AAR is required on the inner surface of 707 landing gear truck beams. In deference to Boeing's preferred finishing method, AAR Landing Gear Services discontinued applying the enamel top coat to internal truck beam surfaces of 747,757 and 767 landing gear earlier this year.

FAA approval of enamel coating on MGL truck beam inner surfaces is available through the issuance of an FAA Form 8100-9 upon customer request to Boeing. The FAA is reviewing the Boeing top coating equivalency determination in the MOM for its effect on the UPN. The Company expects no contingent liability or financial penalties related to the FAA Notice.

AAR, which has been operating FAA approved Repair Stations since 1968, and its over 6,100 employees are committed to complying with high industry standards and regulatory requirements which are designed to ensure the safety of the flying public. AAR has and will continue to work diligently with Boeing and the FAA to clarify and resolve this issue with out disruption to its customers.

AAR is a leading provider of products and value-added services to the worldwide aerospace and defense industry. With facilities and sales locations around the world, AAR uses its close-to-the-customer business model to serve aviation and defense customers through four operating segments: Aviation Supply Chain; Maintenance, Repair and Overhaul; Structures and Systems; and Aircraft Sales and Leasing. More information can be found at http://www.aarcorp.com.

This press release contains certain statements relating to future results, which are forward-looking statements as that term is defined in the Private Securities Litigation Reform Act of 1995. These forward-looking statements are based on beliefs of Company management, as well as assumptions and estimates based on information currently available to the Company, and are subject to certain risks and uncertainties that could cause actual results to differ materially from historical results or those anticipated, including those factors discussed under Item 1A, entitled "Risk Factors", included in the Company's May 31, 2007 Form 10-K. Should one or more of these risks or uncertainties materialize adversely, or should underlying assumptions or estimates prove incorrect, actual results may vary materially from those described. These events and uncertainties are difficult or impossible to predict accurately and many are beyond the Company's control. The Company assumes no obligation to publicly release the result of any revisions that may be made to any forward-looking statements to reflect events or circumstances after the date of such statements or to reflect the occurrence of anticipated or unanticipated events. For additional information, see the comments included in AAR's filings with the Securities and Exchange Commission.

Web site: http://www.aarcorp.com/




Review Article Be the first to review this article

SolidCAM: Cutting Webinar

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
PTC Marches On With New Vuforia AR Platform Release
Jobs
Architectural Designer for Champion Home Builders at Troy, MI
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
GIS Analyst for G2 Partners LLC at San Ramon, CA
GIS Software Developer for SoCalGas at Los Angeles, CA
GIS Software Developer for UDC at Englewood, CO
Upcoming Events
ASSESS 2017 CONGRESS at Bolger Center Potomac MD - Nov 1 - 3, 2017
FABTECH 2017 at McCormick Place Chicago IL - Nov 6 - 9, 2017
ATX MINNEAPOLIS 2017 at Minneapolis MN - Nov 8 - 9, 2017
2017 China Chongqing International Machine Tool Show (CCIMT) at Chongqing International Expo Center, Yubei Chongqing China - Nov 13 - 16, 2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise