DeskProto to preview 123WaxRing system at Baselworld jewelry show.

Utrecht (the Netherlands), March 31, 2008 -- Delft Spline Systems announces an addition to its DeskProto CAM software: the 123WaxRing system. This new system (patent pending) is meant for jewelers, and makes creating jewelry wax models easier than ever before. 123WaxRing will be presented at the Baselword jewelry show, held in Basel (Switzerland) from April 3 to April 10. You can find it a the stand of DeskProto reseller Horbach: Hall 3.U, Stand M10.

The 123WaxRing system makes CNC machining your wax model easier than 3D printing it: using pre-shaped wax disks, a special fixture and smart software, milling has become a push-the-button process. No need to prepare a wax block, change tools, reconfigure a fixture or reset the zero point: three times fasten one single screw is all you need to do.

The toolpaths are prepared by the 123WaxRing wizard, which runs in the DeskProto software. Required input is an STL file, from any jewelry design program. The system will be shown using a Roland JWX-10 wax milling machine, it can be used on any 4 axis CNC milling machine though.

"Jewelers have been asking us to combine DeskProto with a fixture." says Lex Lennings, product manager for DeskProto and 123WaxRing. "We are very proud of this new solution which is more than just another fixture: it makes creating jewelry wax models significantly easier than with other solutions."

123WaxRing is aimed at jewelers, to allow in-house manufacturing of wax models. Not only ring models are possible: it is also easy to create wax models of charms, pendants and alike designs.

About Baselworld:


Baselworld is a yearly trade-show for the watch and jewelry industry worldwide. Over 2,000 exhibitors - specialists in watches, jewelry, precious gems and related brands - showcase their products to over 100.000 visitors. The show is located in Basel (Switzerland), April 3 - 10, 2008.


For more information see www.baselworld.com

About 123WaxRing and DeskProto:

DeskProto by Delft Spline Systems is the 3D CAM program that has made CNC milling a competing technology for Rapid Prototyping, and 123WaxRing is an optional extra to DeskProto. Key features are the ease of use (the system is aimed at designers, not at CAM specialists) and the low price.

For more information see www.123waxring.com and www.deskproto.com

About Horbach:

Horbach Giesstechnik from Germany is a specialty shop for the jewelry manufacturing industry. Since over 80 years Horbach offers machines, tools and supplies for the design and production of jewelry.

For more information see www.horbach-giesstechnik.de (in German).


DeskProto is a registered trademark ® of Delft Spline Systems.
123Ring is a Trade Mark of Delft Spline Systems.
Patent pending
For more information on this press release contact Lex Lennings of Delft Spline Systems :
Tel +31 30 296 5957, Fax +31 30 296 2292
Website www.deskproto.com, www.123waxring.com, Email Email Contact




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise