DP Technology and Mori Seiki perform successful test cut using new cutting-tool technology and ESPRIT Turning Spinning Tool Add-In

Camarillo, Calif. — March 31, 2008 — Computer-aided-manufacturing (CAM) industry innovator DP Technology, creator of ESPRIT®, recently performed a successful test cut that was the first to use new turning spinning-tool technology developed jointly by Mori Seiki, a leader in the manufacturing of multi-axis mill-turn centers, and Kennametal Inc., a leader in cutting-tool technology.

Designed to distribute heat and wear more effectively than a single-point lathe tool, the new turning spinning-tool technology can increase productivity by up to 500 percent and tool life by up to 2,000 percent. This new cutting technology employs a specialized insert — similar in design to a round, or full-radius insert — mounted at the bottom of a cylindrical tool shank held in a rotary spindle.

“This technology is promising because of all the advantages it provides,” said Olivier Thenoz, DP’s mill-turn product manager. “In the end, it means better productivity.”
Thenoz teamed up with Nitin Chaphalkar, engineering team leader for Mori Seiki’s Machining Technology Laboratory (MTL) at the company’s Chicago Technical Center last month to perform the cut. The test included roughing and finishing operations on the outer diameter (OD) with a Mori Seiki NT4200. The full capabilities of the turning spinning tool were put to the test with OD passes on straights, tapers and arcs without the use of coolant on the steel work piece.

“The advantage of the spinning tool is that there is no one single point on the tool that is in contact with the work piece all the time,” Thenoz said, “and this is very good for heat dissipation and tool wear. Cutting conditions are no longer limited by the heat generated in the process, but by power available in the machine.”
“Cutting forces generated while machining with single-point tools impart a bending movement on the tool and give rise to vibrations,” Chaphalkar said, explaining the potential benefits of an axially loaded tool. “In the case of axially loaded tools, such as a spinning tool, most of the cutting forces are directed axially into the spindle and hence significantly reduce vibrations. The point of this tool is to reduce vibration and chatter, and to increase tool life and productivity.”

For the initial OD rough cut, the spinning tool was inclined at a 20-degree angle, which, according to research conducted by MTL, is the angle that allows the most effective heat evacuation for this application. The turning spinning tool is also well adapted to cutting in a back-and-forth motion, and this capability was also put to the test on taper and arc moves — with impressive results. The tool remained close to the material throughout the cut, and the repositioning moves necessary with the use of single-point tools cutting in a single direction were not required.

According to Chaphalkar, Kennametal Inc. pioneered the foundations of the turning spinning tool. Mori Seiki continued development and took its version of the tool into several CAM companies to solicit a solution for the new technology.

After being contacted by Mori Seiki in October of 2007, DP Technology became the only CAM company that demonstrated it was able to take on the challenge, and the ESPRIT Turning Spinning Tool Add-In was complete by the end of November.

Chaphalkar said that, while he was able to program basic functions by hand, the ESPRIT Turning Spinning Tool Add-In is the right solution for making the most of the tool.
“With ESPRIT, the programming complexities are made easier and customers will be able to use the technology efficiently,” he said.

Thenoz said that developing for ease-of-use while making the most of new technology means better results for end-users with diverse needs.
“We are looking for new programming challenges and are trying to stay ahead of all the new cutting technology,” Thenoz said. “We have shown that before, with the new B-axis turning, and this is a continuation of that philosophy. We want advanced functionalities and, at the same time, functionalities for everyone.”

Mori Seiki plans to employ the new turning spinning tool technology in Mori Seiki Japan for “our own manufacturing operations,” Chaphalkar said. The technology will be also exhibited at a Mori Seiki open house in Chicago in May of 2008, in addition to ESPRIT World Conference 2008, IMTS 2008, JIMTOF 2008 and EMO 2009.
“It’s a great partnership with Mori Seiki,” Thenoz said of the development of the turning spinning-tool technology. “It’s important for us to be involved in this project and to have the opportunity to perform test cuts like this one.”
About the ESPRIT Turning Spinning Tool Add-In

The new ESPRIT Turning Spinning Tool Add-In makes it easy to use Mori Seiki’s new spinning tool technology. The add-in provides a new interface to define the size and shape of the tool being used and adds new machining technology parameters to all standard turning operations in ESPRIT that let the user define the rotation speed of the tool spindle and the angle of inclination for the cutting plane.

For spinning tool turning operations, it is typical to set the tool spindle and turning spindles to the same revolutions per minute (RPM). The user has the option of creating the tool path in +Y or –Y in the YZ plane, and also has the ability to rotate the cutting plane about the Z axis to allow machining above or below the center line. The tilt of the tool is handled using a standard parameter available for any ESPRIT turning operation. ESPRIT supports full simulation of the cutting path with collision detection. The add-in also includes updated post processors for Mori Seiki machines.


ESPRIT is a high-performance computer-aided manufacturing (CAM) system for a full range of machine tool applications. ESPRIT delivers powerful full-spectrum programming for 2–5 axis milling, 2–22 axis turning, 2–5 axis wire EDM, multitasking mill-turn machining and B-axis machine tools, and high-speed 3- and 5-axis machining.
ESPRIT’s high-performance capabilities include machining any part geometry (solid, surface, or wireframe), universal post processing to format G-code for virtually any machine tool, and solid simulation and verification with dry runs rendered in dynamic solids for optimal part quality and consistency. ESPRIT is 100 percent pure Windows®, and provides a comfortable and familiar user interface for maximum productivity.

About DP Technology

DP Technology is a computer-aided manufacturing (CAM) software market leader with a mission to provide CNC programmers with the most powerful CAM software ever. DP Technology’s flagship product, ESPRIT, captures the company’s vision of technology’s potential and its passion for excellence.

DP Technology maintains its worldwide headquarters in Camarillo, Calif., and product development teams in California and Florence, Italy. Sales and support operations are located in Europe, Asia, and North and South America. For additional information about DP Technology and ESPRIT, call +1-805-388-6000, send an e-mail to Email Contact, or visit the company Web site at www.dptechnology.com.

MEDIA CONTACT:                 
Stacey Wiebe
Public Relations Coordinator
DP Technology
(805) 388-6000
Email Contact

Chuck Mathews
Vice President
DP Technology
(805) 388-6000
Email Contact

Review Article
  • October 09, 2008
    Reviewed by 'ilan'
    In the article mentioned the software, the machine but not Kennametal's tools and inserts.

      Was this review helpful to you?   (Report this review as inappropriate)

For more discussions, follow this link …

Featured Video
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
System Designer/Engineer for Bluewater at Southfield, Michigan
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
4th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2018) at Movenpick Hotel Amsterdam City Centre Amsterdam Netherlands - Sep 19 - 21, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise