Infor Helps Organizations Reduce Energy Costs and Achieve Sustainability Goals

SINGAPORE—(BUSINESS WIRE)—March 26, 2008— Infor today announced Infor EAM Asset Sustainability Edition, an enterprise software solution that allows organizations to integrate energy consumption and emissions management into their asset management practices. Infor EAM Asset Sustainability Edition enables organizations to substantially reduce energy costs, while minimizing carbon emissions and the impact of their operations on the environment.

Established benchmarks from the U.S. Department of Energy and industry sources demonstrate that facilities and manufacturers can reduce energy consumption up to 20 percent through maintenance programs that focus on energy consumption and efficiency. Infor EAM Asset Sustainability Edition factors energy consumption into total asset performance, providing a more complete understanding of the true costs to operate and maintain an asset. The software goes beyond just energy management, factoring in an asset's consumption of any of the WAGES commodities (water, air, gas, electricity, and steam), as well as monitoring of fugitive emissions, like ozone-depleting refrigerant gases.

"There is no question that high energy costs are a drag on organizational budgets and that inefficient energy practices have a negative impact on our environment," said John Murphy, director of Industry & Product Marketing for Infor EAM solutions. "Infor EAM Asset Sustainability Edition is a groundbreaking solution that helps address these issues. With this solution, organizations can take a strategic approach to energy efficiency, using software automation to implement practices that promote sustainability and profitability."

Organizations across all sectors face soaring energy costs from basic utilities, such as lighting and HVAC, to the assets that enable their critical business operations, like manufacturing equipment and refrigeration coolers. In addition to reining in high energy costs, organizations are seeking to reduce their energy consumption as part of sustainability initiatives to minimize carbon emissions and offset the impact of their operations on the environment.

Infor EAM Asset Sustainability Edition automates the processes associated with managing assets and their related resource consumption. It tracks the consumption of individual assets in real-time, evaluates the data against user-defined conditions, and alerts users to anomalies when assets exceed acceptable performance thresholds. The solution also elevates decision-making by incorporating consumption and emission data into key performance indicators and reports. Program managers, for example, can generate reports that provide macro-level analysis of CO2 emissions and drill down into the performance of each asset through easy-to-use graphical dashboards.

The software also enables companies to benchmark the performance of a specific asset to determine the cost of maintaining it at current energy consumption levels versus replacing it with a newer, more energy efficient asset. This functionality enables organizations to make strategic decisions, factoring in energy consumption costs, the price and energy specifications of a replacement, and the projected return-on-investment date.

Infor EAM Asset Sustainability Edition is a web-architected application that can be deployed on-premises at the customer site or hosted by Infor. The software receives energy consumption data through asset sub-metering, either through existing sub-metering electronics systems or other third-party sensors, and can use wireless mesh networks for communications. For more information on Infor EAM Asset Sustainability Edition, visit http://www.infor.com/goinggreen/solutions/greeneam/as/.

Infor EAM Asset Sustainability Edition demonstrates Infor's commitment to deliver solutions that help customers implement the business processes essential to driving their green and sustainability programs (see Dec. 12, 2007 press release titled, "Infor Helps Organizations Implement Green and Sustainability Programs"). In addition to EAM, these solutions include other key areas such as Supply Chain Management (SCM), Product Lifecycle Management (PLM), Performance Management (PM) and ERP. For more information on Going Green, visit www.infor.com/goinggreen.

About Infor

Infor delivers business-specific software to enterprising organizations. With experience built in, Infor's solutions enable businesses of all sizes to be more enterprising and adapt to the rapid changes of a global marketplace. With more than 70,000 customers, Infor is changing what businesses expect from an enterprise software provider. For additional information, visit www.infor.com.

This announcement reflects the direction Infor may take with regard to the specific product(s) described herein, all of which is subject to change by Infor in its sole discretion, with or without notice to you. This announcement is not a commitment to you in any way and you should not rely on this document or any of its content in making any decision. Infor is not committing to develop or deliver any specified enhancement, upgrade, product or functionality, even if such is described in this announcement and even if such description is accompanied by words such as "anticipate," "believe," "expect," "intend," "may," "plan," "project," "predict," "should," "will," and/or similar expressions. Many factors can affect Infor's product development plans and the nature, content and timing of future product releases, all of which remain in the sole discretion of Infor. This announcement, in whole or in part, may not be incorporated into any contractual agreement with Infor or its subsidiaries or affiliates. Infor expressly disclaims any liability with respect to this announcement.

Contact:

Infor
Wade Coleman, 678-591-4706
Email Contact
or
Dominique Ng, (65) 968-56875
Email Contact




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise