Cimatron Names Bill Gibbs President North America

Assumes Full Responsibility for Both GibbsCAM and CimatronE Business Lines in North America

GIVAT SHMUEL, Israel, February 15 /PRNewswire-FirstCall/ -- Cimatron Limited (NASDAQ: CIMT), a leading provider of integrated CAD/CAM solutions for the toolmaking and manufacturing industries, today announced the nomination of Mr. Bill Gibbs as President North America, replacing Mr. Sam Golan. Bill Gibbs has also been nominated Director at Cimatron Technologies, Inc. (CTI). Under the new leadership of Bill Gibbs, CTI will continue to focus on developing the CimatronE business in North America, offering the best in class integrated CAD/CAM solution for Mold and Die makers.

Following the recently announced merger of Gibbs and Associates into Cimatron, Cimatron intends to capitalize on the strong presence of Gibbs and Associates in North America in order to enhance the sales efforts for CimatronE in this territory. Bill Gibbs, who will continue to maintain his position as President and CEO of Gibbs and Associates will now be responsible for promoting both CimatronE and GibbsCAM product lines in North America.

About Cimatron

With more than 25 years of experience and over 20,000 installations worldwide, Cimatron is a leading provider of integrated, CAD/CAM solutions for mold, tool and die makers as well as manufacturers of discrete parts. Cimatron is committed to providing comprehensive, cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time. Cimatron's cutting-edge CAD/CAM solutions are widely used in the automotive, medical, consumer plastics, electronics, and other industries.

Founded in 1982, Cimatron is publicly traded on the NASDAQ exchange under the symbol CIMT. Cimatron's subsidiaries and extensive distributor network are located in over 35 countries to serve customers worldwide with complete pre- and post-sales support. For more information, please visit http://www.cimatron.com.

About Gibbs and GibbsCAM

For over 20 years, Gibbs and Associates has been a leader in providing cutting edge CAD/CAM technology, while maintaining its signature ease-of-use and productivity. Powerfully Simple, Simply Powerful is the guiding philosophy at Gibbs. Gibbs believes in empowering the NC programmer, machinist, and manufacturing engineer, not eliminating them. Gibbs' goal is to introduce manufacturers to new technologies and new ways of working that makes their machining easier and their businesses more profitable. To achieve this goal, Gibbs creates tools that are naturally intuitive, graphically interactive, extremely visual, associative, and just plain enjoyable to use. Gibbs provides a total quality solution with the service and support successful customers require.

GibbsCAM is certified under the Autodesk Inventor Certified Application Program, is a Solid Edge Certified Select application, and is a SolidWorks Certified CAM Application. GibbsCAM is either offered or endorsed by a number of leading worldwide control and machine tool manufacturers, including GE Fanuc, Infimatic, Siemens, Doosan Infracore, Haas, Index, Mag Fadal, Matsuura, Mazak, Mitsubishi, Mori Seiki and Nakamura Tome. Gibbs and Associates distributes its products worldwide through a network of international Resellers.

In January 2008, Gibbs and Associates merged with Cimatron Ltd, (NASDAQ: CIMT) and is now operating as a Cimatron company. For more information about Gibbs and Associates and its CAM software packages, call +1-800-654-9399, or visit the company on-line at http://www.GibbsCAM.com.

Safe Harbor Statement

This press release includes forward looking statements, within the meaning of the Private Securities Litigation Reform Act Of 1995, which are subject to risk and uncertainties that could cause actual results to differ materially from those anticipated. Such statements may relate to the company's plans, objectives and expected financial and operating results. The words "may," "could," "would," "will," "believe," "anticipate," "estimate," "expect," "intend," "plan," and similar expressions or variations thereof are intended to identify forward-looking statements. Investors are cautioned that any such forward-looking statements are not guarantees of the future performance and involve risks and uncertainties, many of which are beyond the company's ability to control. The risks and uncertainties that may affect forward looking statements include, but are not limited to: currency fluctuations, global economic and political conditions, marketing demand for Cimatron products and services, long sales cycle, new product development, assimilating future acquisitions, maintaining relationships with customers and partners, and increased competition. For more details about the risks and uncertainties of the business, refer to the Company's filings with the Securities and Exchanges Commission. The company cannot assess the impact of or the extent to which any single factor or risk, or combination of them, may cause. Cimatron undertakes no obligation to publicly update or revise any forward looking statements, whether as a result of new information, future events or otherwise.

    Contacts:
    Ilan Erez, Chief Financial Officer
    Cimatron Ltd.
    Tel.: +972-3-531-2121
    E-mail: 
Email Contact

    Yael Nevat,
    Commitment-IR.com
    Tel: +972-9-714 8866, +972-50-762-6215
    E-mail: 
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise