Basic FEMAP and NEiNastran Advanced Nonlinear Analysis Training Class


March 12th - 14th 2008


This is the perfect class for newcomers to finite element analysis. A very practical approach is taken from the outset.

Students will be shown demonstrations of how to set up, analyze and investigate typical structures. Intensive workshop periods then follow to put this new knowledge into practice. The important features of the FEMAP GUI are introduced in a logical and informative manner. Emphasis during the class is on the construction of proper analysis for both single part and assembly models. Additional troubleshooting techniques are discussed, as well as the various types of common error messages generated by FEMAP.

The objective of this class is to give a solid grounding in FEA basics and good practice to enable the student to carry out real world analysis.

• Introduction to basic part and assembly modeling
• Linear static and normal modes analysis
• 1D, 2D and 3D element modeling
• Importing geometry and geometry repair
• Meshing, mesh repair and hand meshing

Date: March 10th - 11th
Location: Westminster, CA
Length: 2 Days
Course Price: $800 (registration with pre-payment by Fri Feb 15th, 2008)
or $1000 (standard registration)




Advanced Nonlinear Analysis
This class is presented in an informal way with the emphasis towards maximizing the hands on experience for the student. Many sample model set up, analysis and results processing examples are presented live by the tutor for the class to learn, discuss and investigate. In addition, examples are provided for the students to practice and gain confidence in the methods. These are increasingly challenging as the class proceeds. Many students work with the tutor to create sample analyses that are relevant to their particular industry segment or working practice. This is highly encouraged, as is bringing example problems to class.

The objective of this class is to provide the student with the skills to be able to interpret the engineering problem, identify the required analysis process clearly, and use Noran Engineering, Inc. tools to carry it out and finally to critically review the results.

• Differences between linear and nonlinear analysis
• Types of nonlinear analysis:

Geometric large displacement
Material nonlinearity
Follower forces
• NEiNastran nonlinear analysis setup
• Modeling techniques in nonlinear analysis
• Nonlinear analysis solution strategy
• Material modeling
• Contact modeling
• Nonlinear buckling techniques
• Nonlinear prestiffening for normal modes analysis
• Transient nonlinear dynamics analysis
• Automatic contact set up in assemblies

Date: March 12th - 14th
Location: Westminster, CA
Length: 3 Days
Course Price: $1200 (registration with pre-payment by Fri Feb 15th, 2008)
or $1500 (standard registration)


Class size is limited to enhance training
so call (714) 899-1220 ext 212 or email Email Contact
to reserve your seat now!

Email Contact

Noran Engineering, Inc.

5555 Garden Grove Blvd., Ste 300
Westminster , CA 92683, USA
Phone: (714) 899 - 1220
Email: Email Contact

Review Article Be the first to review this article
Featured Video
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
System Designer/Engineer for Bluewater at Southfield, Michigan
Senior Structural Engineer for Wiss,Janney, Estner Assoicates, Inc at houston, Texas
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Upcoming Events
ESPRIT World 2018 at Indianapolis Marriott Downtown 350 West Maryland Street Indianapolis IN - Jun 11 - 15, 2018
HxGN LIVE 2018 at The Venetian Las Vegas NV - Jun 12 - 15, 2018
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
4th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2018) at Movenpick Hotel Amsterdam City Centre Amsterdam Netherlands - Sep 19 - 21, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise