Delphi's Advanced Technology Improves Highway Safety
[ Back ]   [ More News ]   [ Home ]
Delphi's Advanced Technology Improves Highway Safety

TROY, MI -- (MARKET WIRE) -- Feb 04, 2008 -- A leader in safety innovations for more than 100 years, Mercedes-Benz is among the first automakers to include Delphi Corporation's (PINKSHEETS: DPHIQ) Battery Disconnect Safety Device (BDSD) on multiple new car lines.

Several Mercedes-Benz models incorporate Delphi's BDSD, including all C-Class sport coupes and luxury sedans and the M-Class sport utility vehicles.

Mercedes-Benz has always optimized leading-edge technology to assist in keeping passengers out of harm's way and Delphi's BDSD expands on that by preventing short circuiting that could occur following some collisions.

"Providing our customers with the technology and products they need to make their vehicles safer has always been a top priority at Delphi. We are extremely happy to help Mercedes-Benz enhance passenger safety by partnering with the automaker to incorporate Delphi's BDSD technology on all of its C-Class and M-Class models," said Mark Sabau, Global Product Business Unit Director, Delphi Electrical Centers.

Delphi's BDSD severs the connection between the battery and the starter and alternator in less than 1 millisecond after an electrical signal from the airbag control unit triggers the pyrotechnic safety switch. Fuses may protect other cables, but high variation in currents that flow through this cable while cranking the engine prohibits their use here.

While severing power between the battery and starter and alternator in passenger vehicles following collisions is not new, Delphi's BDSD is far more reliable than the systems involving electromechanical relays and standard fuses that they replace. In many instances, Delphi's BDSD is also less expensive -- up to 20 percent less expensive than some competitors' products.

Although Delphi's BDSD disconnects power from the vehicle battery to unfused cables, it does not cut power to safety functions such as door locks, hazard lights, interior lighting and automatic emergency call systems.

Delphi's BDSD is mounted near the battery, in most cases using only two bolts. This makes replacement of a deployed BDSD quick and easy.

Because it is comprised of a small number of parts, all enclosed in high-strength fiber-reinforced plastic, and because electrostatic discharge protection is built in, it is unlikely that an installer could trigger deployment of the pyrotechnic device. Even if activation were to occur during installation, the risk of injury is very low because all action takes place inside the reinforced plastic housing.

Delphi's BDSD meets all common specifications in the automotive industry, is free of heavy metals and is available for immediate production. The technology can also be applied to high-voltage harnesses used in hybrid vehicles, high-voltage switches and cables in trains, boats, commercial vehicles and industrial equipment.

Delphi Electrical/Electronic Architecture delivers power and signal distribution networks for today's increasingly complex vehicles. Delphi engineers act as master architects by using proprietary design tools and software to create a virtual model of a vehicle's E/E architecture -- down to the last connector, electrical center, electronic module and wiring harness. In doing so, they evaluate the impact of various trade-offs to deliver a fully optimized E/E architecture system backed by Delphi technical centers and manufacturing facilities in 31 countries around the globe.

For more information about Delphi Corp. (PINKSHEETS: DPHIQ), visit


This press release, as well as other statements made by Delphi may contain forward-looking statements that reflect, when made, the Company's current views with respect to current events and financial performance. Such forward-looking statements are and will be, as the case may be, subject to many risks, uncertainties and factors relating to the Company's operations and business environment which may cause the actual results of the Company to be materially different from any future results, express or implied, by such forward-looking statements. In some cases, you can identify these statements by forward-looking words such as "may," "might," "will," "should," "expects," "plans," "anticipates," "believes," "estimates," "predicts," "potential" or "continue," the negative of these terms and other comparable terminology. Factors that could cause actual results to differ materially from these forward-looking statements include, but are not limited to, the following: the ability of the Company to continue as a going concern; the ability of the Company to operate pursuant to the terms of the debtor-in-possession financing facility and to obtain an extension of term or other amendments as necessary to maintain access to such facility; the terms of any reorganization plan ultimately confirmed; the Company's ability to obtain Court approval with respect to motions in the chapter 11 cases prosecuted by it from time to time; the ability of the Company to prosecute, confirm and consummate one or more plans of reorganization with respect to the chapter 11 cases; the Company's ability to satisfy the terms and conditions of the EPCA; risks associated with third parties seeking and obtaining Court approval to terminate or shorten the exclusivity period for the Company to propose and confirm one or more plans of reorganization, for the appointment of a chapter 11 trustee or to convert the cases to chapter 7 cases; the ability of the Company to obtain and maintain normal terms with vendors and service providers; the Company's ability to maintain contracts that are critical to its operations; the potential adverse impact of the chapter 11 cases on the Company's liquidity or results of operations; the ability of the Company to fund and execute its business plan (including the transformation plan described in Note 2. Transformation Plan and Chapter 11 Bankruptcy, to the consolidated financial statements) and to do so in a timely manner; the ability of the Company to attract, motivate and/or retain key executives and associates; the ability of the Company to avoid or continue to operate during a strike, or partial work stoppage or slow down by any of its unionized employees or those of its principal customers and the ability of the Company to attract and retain customers. Additional factors that could affect future results are identified in the Company's Annual Report on Form 10-K for the year ended December 31, 2006, including the risk factors in Part I. Item 1A. Risk Factors, contained therein and the Company's quarterly periodic reports for the subsequent periods, including the risk factors in Part II. Item 1A. Risk Factors, contained therein, filed with the SEC. Delphi disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events and/or otherwise. Similarly, these and other factors, including the terms of any reorganization plan ultimately confirmed, can affect the value of the Company's various prepetition liabilities, common stock and/or other equity securities. Additionally, no assurance can be given as to what values, if any, will be ascribed in the bankruptcy cases to each of these constituencies. A plan of reorganization could result in holders of Delphi's common stock receiving no distribution on account of their interest and cancellation of their interests. In addition, under certain conditions specified in the Bankruptcy Code, a plan of reorganization may be confirmed notwithstanding its rejection by an impaired class of creditors or equity holders and notwithstanding the fact that equity holders do not receive or retain property on account of their equity interests under the plan. In light of the foregoing, the Company considers the value of the common stock to be highly speculative and cautions equity holders that the stock may ultimately be determined to have little or no value. Accordingly, the Company urges that appropriate caution be exercised with respect to existing and future investments in Delphi's common stock or other equity interests or any claims relating to prepetition liabilities.

Image Available:

Add to Digg Bookmark with Add to Newsvine

Maraline Kubik
330 373 5682

Email Contact