Stratasys Introduces High-Performance Prototyping & Production System with Entry-Level Price

MINNEAPOLIS—(BUSINESS WIRE)—January 29, 2008— (Nasdaq: SSYS) Stratasys today introduced a new additive fabrication system for prototyping and direct digital manufacturing applications. The FDM 360mc(TM) was unveiled at the Medical Design & Manufacturing (Pacific Design) Show in Anaheim.

The FDM 360mc was designed for users with demanding applications that require the same accuracy, repeatability, and material specifications of more expensive FDM systems but who don't need as much speed or as many features.

"The FDM 360mc is even lower-priced than our Vantage i," says FDM Product Manager Patrick Robb. "It's now the least expensive system in our high-performance line, yet it has all the accuracy and repeatability of our high-end FDM 400mc.(TM) It offers both direct digital manufacturing and accurate prototyping with an easy-to-realize return on investment for most any production operation or development group. With some of the more expensive '3D printers' priced in the $50,000 to $75,000 range, the FDM 360mc will compete with them on price, yet remain in a league above them in output quality."

The performance of the FDM 360mc is the result of technology innovation and manufacturing process improvements in the extrusion head gantry, which enabled it to be straighter and stiffer. This enables the extrusion head to hold a tighter positional accuracy that can produce parts with a higher tolerance. These innovations were introduced last August on the FDM 400mc.

The FDM 360mc builds with ABS-M30, which offers substantial improvements over standard Stratasys ABS across a number of mechanical properties, including tensile strength, impact strength, and flexural strength. ABS-M30 mechanical properties for strength are up to 67 percent stronger than standard Stratasys ABS, expanding capabilities for functional testing or building production parts.

The FDM 360mc comes standard with a build envelope of 14 x 10 x 10 in (356 x 254 x 254 mm), which is upgradeable to 16 x 14 x 16 in (406 x 356 x 406 mm). Along with this upgrade comes two more material canisters bays, for a total of four bays (two build material and two support material). The larger build envelope and the additional material canisters enable users to run larger builds. When the first material canister is empty, an auto-changeover function loads the second canister and continues the build process uninterrupted. This allows users to leave the machine unattended for long periods of time.

Available slice thicknesses are 0.005 in (0.127 mm), 0.007 in (0.178 mm), 0.010 in (0.254 mm), and 0.013 in (0.330 mm).

The FDM 360mc will begin shipping immediately.

Stratasys Inc., Minneapolis, manufactures additive fabrication machines for prototyping and direct digital manufacturing. It also offers prototype and part manufacturing services. According to Wohlers Report 2007, Stratasys supplied 41 percent of all additive fabrication systems installed worldwide in 2006, making it the unit market leader for the fifth consecutive year. Stratasys patented and owns the rapid prototyping process known as fused deposition modeling (FDM(R)). The process creates functional prototypes and end-use parts directly from any 3D CAD program, using ABS plastic, polycarbonate, PPSF, and blends. The company holds more than 180 granted or pending additive fabrication patents globally. Stratasys products are used in the aerospace, defense, automotive, medical, education, electronic, and consumer product industries. On the Web: www.Stratasys.com

FDM 360mc is a trademark, and FDM is a registered trademark, of Stratasys Inc.

Attention Editors: If you wish to publish reader-contact information, please use: info@stratasys.com, 952-937-3000, 1-888-480-3548, www.Stratasys.com

Contact:

Stratasys
Editorial Contact:
Joe Hiemenz, 952-906-2726
Email Contact
or
Investor Contact:
Shane Glenn, 952-294-3416
Email Contact




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise