Metris ModelMaker drives digital development at Thule Towing Systems

Thule Towing Systems’ successfully shifted from a predominantly manual process to developing towbar systems using Metris ModelMaker laser scanning and mechanical design/simulation software. As vehicle CAD files are often too detailed, Thule engineers use Metris ModelMaker laser scanner to create a digital 3D copy of a new vehicle’s rear end. This graphic 3D surface – inserted into a mechanical design environment – sets accurate spatial boundary conditions for designing a dedicated towbar system. Following this digital development approach, Thule more quickly evolves to an optimum towbar design, saving multiple prototype testing rounds and cutting time to market from 15-20 weeks to approximately 9 weeks.

Providing a head start in towbar development

Although the use of towbars is more established in the market of professional vehicles, towbar systems continually penetrate the market of privately owned vehicles. The possibility to quickly link a bike carrier to a towbar supports towbar market growth, and there is a clear trend towards higher end solutions, such as retractable towing systems. Thule – a global leader in sports utility transportation – is one of the major towbar system manufacturers in the world. Following Thule’s 2006 acquisition of the Dutch towbar manufacturer Brink International, the Thule Towing Systems business unit for Europe/Asia operates from Staphorst in The Netherlands.Thule Towing Systems develops and manufactures towbar systems for vehicle OEMs as well as for the car after market. For a new vehicle that will soon hit the market place, Thule engineers start with taking a detailed 3D scan of the bottom end of the vehicle, the area where the new towbar system needs to be incorporated. They use the Metris ModelMaker scanner – mounted on an articulated measurement arm – and manually scan the area of interest, which typically includes bumper, fuel tank, muffler, spare wheel, chassis sections, etc. The scanner’s high frame rate and wide laser stripe make that the area is scanned quickly and precisely. The resulting 3D surface scan takes shape in real time, which makes it easy to track scan coverage and progress. The fully portable Metris ModelMaker system can be used internally at Thule just as easily as at customers’ sites, saving vehicle transportation time and cost.

Thule engineers use Metris ModelMaker laser scanner to create a digital 3D copy of a new vehicle’s rear end.

A quick capture of the geometric data you need

The scanner automatically adapts laser power to account for varying shape, color and reflectivity.

“Our prime objective with Metris ModelMaker is digitizing the space that is available to integrate the towing system,” says Thule After Market development department at Thule Towing Systems in Staphorst, The Netherlands. “For us, the graphic 3D surface scan represents critical engineering input right at the start of the towbar development process. In this way, we immediately see where we can fit particular mechanical parts of different shapes and sizes in order to design the assembly that attaches the towbar to the vehicle chassis. Formerly, we had to spend lots of time consulting CAD files we received from auto manufacturers, which contain much irrelevant data as well as information items that have become outdated.”

Metris ModelMaker is a digital laser scanner combining superior stripe resolution with one of the highest effective throughput rates available on the market place.
This allows surface features to be captured accurately. Thule engineers apply this detailed feature scanning capability to verify the location of towbar system attachment points on the chassis of the vehicle. While scanning, the scanner additionally adapts the power of its laser beams to account for varying shape, color and reflectivity. This makes that the entire scan can be executed without having to manually adapt scanner settings.

Feeding facts into the development process

The result of the scan is a cloud of hundred thousands or even millions of measured surface points that is managed efficiently in the Metris Kube software. “In the Metris Focus Reverse Engineering software, we filter the point cloud to eliminate excess points and transform the point cloud into a polygon surface mesh,” Thule After Market development department explains. “Then we export the entire 3D surface – including both free-form areas and features – into Pro/Engineer, our mechanical engineering and design CAD tool. From a designers’ perspective, it is great to see the 3D surface you just scanned in your design software environment and look at it from any preferred standpoint. It is so realistic that it feels like working on the real vehicle, while benefitting from a higher degree of design efficiency.”

Thule After Market development department says that this digital approach allows Thule design engineers to quickly try different design concepts, and further elaborate on the most promising towbar configurations. “Ultimately, this results in a better towbar design that costs less and is often more elegant,” Thule After Market development department explains. “Besides reducing towbar weight and welding effort/material, the engineering process increases manufacturability and lowers the number of recalls. In the past, we had to quickly handicraft a towbar assembly mockup based on tape measurements throughout the day the vehicle was made available to us. Since the digital process is put in place, there is far less work in our workshop. In fact, the first physical tests of newly designed towbars have proven OK immediately, eliminating multiple physical testing rounds overall.”

In the digital design environment, the scanned 3D surface along with the tow bar assembly can be investigated from any preferred standpoint

Delivering better product faster and at lower cost

As a conclusion, Thule After Market development department states that the use of Metris ModelMaker laser scanning and mechanical design/simulation software has delivered on promise. “We selected the innovative Metris ModelMaker on the basis of a productivity analysis and a solid Metris service organization. Our updated development process helped us further increase towbar system quality and compress time to market from 15-20 weeks to only 9 weeks. Such significant time saving along with a better engineered and easier to manufacture product reduces cost considerably. This clearly supports Thule Towing Systems’ drive to continuously enhance process and product innovation.”


The 3D surface scan immediately shows Thule engineers where they are able to fit particular mechanical towbar parts of different shapes and sizes.

Read the complete story ...

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Colortrac: LearnMore
TurboCAD pro : Free Trial

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise