CD-adapco Releases STAR-CCM+ V2.10

STAR-CCM+ V2.10: Multiphase Flow and More

CD-adapco announces the release of STAR-CCM+ V2.10, the latest version of their engineering process oriented Computational Fluid Dynamics software. Maintaining a demanding four-monthly release cycle, the latest version of STAR-CCM+ includes many enhancements in terms of usability, CAE process and physical modelling capability.

Multiphase Flow

Among many new features, STAR-CCM+ V2.10 introduces a Lagrangian multiphase flow capability. From calculating the impact of rain droplets on the windscreen of a car, to predicting the erosive effect of small particles of sand carried in an oil pipeline, the Lagrangian models allow users to simulate the transport of solid particles, liquid droplets or bubbles of gas by a background fluid. The trajectories are calculated from the inertia, hydrodynamic drag, and gravitational forces acting on each of the particles, droplets or bubbles (known collectively as discrete phases), for both steady and unsteady simulations.

CD-adapco’s VP of Product Management, Jean-Claude Ercolanelli explains: “From the beginning, a key aim of our development program was to make STAR-CCM+ the industrial code of choice for multiphase applications. In the past twelve months we’ve partly achieved that goal, with the introduction of what is widely regarded as the most comprehensive free-surface modeling capability available in a multipurpose CFD code. The introduction of Lagrangian multiphase into STAR-CCM+ V2.10 is also a significant milestone, enhancing an already recognized capability for efficiently solving large and complex problems.”

“In developing the Lagrangian models we have leveraged twenty years of experience as the leading provider of CFD to the automotive industry, to provide an efficient framework for tackling difficult problems - such as vehicle soiling, or erosion in long pipelines – which, although previously possible in principal, have proved difficult to solve in practice,”says Ercolanelli. “STAR-CCM+ V2.10 brings the routine solution of these multiphase problems, and many others, within the reach of every CAE engineer.”

The multiphase capability of STAR-CCM+ V2.10 is further enhanced with the addition of a compressibility option for free-surface calculations that will allow users to simulate the progress of pressure waves through liquids and to consider the influence of compressibility in regions of mixed vapor and liquid, in which the speed of sound is often lower than in either the liquid or vapor phases individually.


“Based around a single integrated process that includes automatic surface repair and solution-efficient polyhedral meshing, STAR-CCM+ already provides the fastest, most automatic route from complex CAD to CFD solution,”says Jean-Claude Ercolanelli.  “For STAR-CCM+ V2.10 we have continued to focus our efforts improving the capability to handle very large size models,  speeding up and refining that process by introducing additional capabilities for managing surface regions, and by providing a new boundary mesh extrusion capability”

Although STAR-CCM+’s surface wrapping capability automatically repairs complex or ‘dirty’ imported CAD, a typical first stage in performing a simulation can be to group specific areas into contiguous regions that are used to prescribe boundary conditions. In STAR-CCM+ V2.10 that process is improved with Boolean operations on surface regions: adding, subtracting or intersecting multiple surface areas to create the required leak-free fluid domains.

The boundary mesh extrusion capability is useful for offsetting the boundary mesh to generate ducts or to extend the computational domain. In both cases the extruder-mesher generates high-quality prismatic elements that are conformal with the volume mesh.

This release also features the addition of a dedicated heat exchanger model for use in underhood thermal management simulation.

The benefit brought by the parallel client / server architecture has also been reinforced to enable true collaborative teamwork.  Multiple STAR-CCM+ clients can now connect on the same STAR-CCM+ server and interact together for their design reviews phases.

Try it today

STAR-CCM+ V2.10 is now available from CD-adapco’s User Services site, or from your local CD-adapco office.

For further information

Please visit

Read the complete story ...

Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
SolidCAM: Program your CNCs directly inside your existing CAD system.
TurboCAD pro : Limited Time offer

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise