Series of Town Hall Meetings on Manufacturing Issues

TV and film star will headline 'Keep it Made in America' events to encourage voters to ask presidential candidates to speak out about the issues that threaten U.S. workers and manufacturers

WASHINGTON, Sept. 20 /PRNewswire-USNewswire/ -- On September 25th in Manchester, New Hampshire, television and film star John Ratzenberger and the Alliance for American Manufacturing (AAM) will kick off a series of "Keep it Made in America" town hall meetings. The town hall series, which will travel to seven cities in twelve weeks, will highlight the growing demand among voters that the presidential candidates address the challenges facing American workers and manufacturers.

"I'm proud to partner with AAM on the 'Keep it Made in America' Town Hall Series. I've traveled all across this country and I've seen firsthand how manufacturing drives our economy. Our manufacturers, workers and their communities are the heart and soul of America," said Ratzenberger. "In this presidential election, we have a chance to make the voices of American manufacturing heard in places like Iowa, New Hampshire and South Carolina where it matters first. We're going to educate and inspire voters to ask the candidates the hard questions about jobs and to find out how they will 'Keep it Made in America'."

From humble beginnings in Bridgeport, Connecticut, John Ratzenberger gained international fame on the acclaimed television series 'Cheers.' During more than three decades of movie making and theatre, John has enjoyed success as a screenwriter, director, producer and multi-nominated Emmy actor. He is also an accomplished entrepreneur and philanthropist. Today, John hosts his own show about manufacturing on the Travel Channel. 'John Ratzenberger's Made in America,' which airs Tuesday's at 9:00 and 9:30 pm ET/PT, brings viewers the stories of the best people, places and products in the United States. He honors the men and women in the United States who work with their hands and skillfully make products that are the backbone of the American economy.

"John has a deep understanding of the challenges we face, including unfair trading practices, that affect real people and real communities all across the country," said Leo W. Gerard, president of the United Steelworkers. "In the towns that we will visit, in companies featured on John's show, and across America, American workers and companies are under attack. Since 2000, we've lost a staggering 3.2 million manufacturing jobs, jobs that offer a better standard of living for millions of hard-working Americans. The town hall series will bring attention to issues that American voters are demanding to hear about -- a real commitment from presidential candidates to ensure a strong manufacturing industry."

"Keep it Made in America" Town hall meetings will be held in the following cities:

    -- Tuesday, September 25th -- Manchester, NH

    -- Wednesday, October 17th -- Des Moines, IA

    -- Thursday, November 8th -- Columbus, OH

    -- Tuesday, November 13th -- Pittsburgh, PA

    -- Thursday, November 29th -- Buffalo, NY

    -- Date TBD -- Chicago, IL

    -- Date TBD -- South Carolina

The series will target voters in the early voting and swing states like New Hampshire and Iowa who have a unique opportunity to impress upon the presidential candidates the urgency of the problems facing American manufacturing. During the town hall events, Ratzenberger will encourage voters to ask the presidential candidates three key questions to determine their commitment to keeping manufacturing jobs in the country:

    -- How will you save American manufacturing jobs?

    -- What specific policies will you enact to strengthen the American
       manufacturing base, which is vital to our economic and national
       security?

    -- What steps will you take to enforce our trade laws and hold cheating
       countries like China accountable?

"Democratic and Republican presidential candidates alike have not adequately addressed the immense challenges facing manufacturing in this country, despite the fact that this important economic sector is central to our national security. American manufacturers supply advanced materials for equipment like the Joint Strike Fighter, the Bradley Fighting Vehicle and the Abrams Tank," said Scott Paul, AAM's executive director. "Voters all over America know how critical it is to reverse the decline in our industrial base and save American manufacturing jobs. We can no longer afford to sit idly by while countries like China cheat on trade agreements, threatening our ability to produce what we need domestically."

"John Ratzenberger shares AAM's dedication to keeping the American manufacturing industry alive, and he has joined us in our quest to urge the candidates to focus on these issues," said Paul. "The American qualities of hard work, ingenuity and innovation have enabled us to get where we are today. But, for America to remain the leader in the global economy, we have to overcome some very real challenges that threaten the vital core of our economic engine. Our town hall events will initiate this important dialogue and empower voters to continue the discussion with the presidential candidates."

For more information on the "Keep it Made in America" town hall series please visit: http://www.americanmanufacturing.org and http://www.manufacturethis.org.

The Alliance for American Manufacturing is a unique non-partisan, non- profit partnership forged to strengthen manufacturing in the U.S. AAM brings together a select group of America's leading manufacturers and the United Steelworkers to promote creative policy solutions on priorities such as international trade, energy security, health care, retirement security, currency manipulation, and other issues of mutual concern. For more information: http://www.americanmanufacturing.org.

Web site: http://www.americanmanufacturing.org/
http://www.manufacturethis.org/


Rating:
Reviews:
Review Article
  • October 09, 2008
    Reviewed by 'Virginia Brooks'
    Actually, I just want to know where the town Hall meeting In Columbus, Ohio is being held and what time it is on Nov. 8, 2007. I would like to get this information out to my lists.
    Thanks Virginia Brooks

      Was this review helpful to you?   (Report this review as inappropriate)


For more discussions, follow this link …
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise