Theorem's Pro/E Translators Are Faster

World-leading CAD/CAM product data exchange specialist, Theorem Solutions has redeveloped its comprehensive range of Pro/E translators to provide major operating speed improvements.

With a completely revised software structure, Theorem’s new series of CADverters will typically translate data to and from PTC’s Pro/E format three times faster than before.

“Under test conditions, we have regularly achieved translation speeds up to 10 times quicker than anything we have seen previously,” says Theorem’s Product Development Manager, Trevor Leeson. “Such an improvement in processing speed means that customers can easily double or treble their throughput using our Pro/E translators, with corresponding cost and productivity benefits.”

The establishment of strategic partnerships with organisations such as Dassault, PTC and UGS also enables Theorem to keep pace with the development cycles of all major design systems. Accordingly, its new Pro/E CADverters are fully compatible with the latest CAD releases – allowing users to freely translate data to and from UG NX2, NX3, NX4 and now NX5, as well as CATIA V5 release 17 and SolidWorks 2008, for example. In addition, Theorem’s use of vendor-supported Application Programming Interfaces (APIs) guarantees the performance of its translators in reading or writing a wide variety of native data formats.

For further information please visit:
http://www.TheoremSolutions.com/pr/pr69.htm


About Theorem Solutions
Theorem Solutions is recognised as one of the world’s leaders in CAD/CAM product data exchange, offering application programs for Direct Database conversion and for International Standards-based conversion methods (STEP). The Theorem CADverter family is the widest range of direct CAD translators available from any single source. In addition to CADverter, it includes CADviewer and Data eXchange Navigator (DXN), which deliver improved communications and interoperability between CAD systems. Theorem’s on-line translation service is at www.cadverter.com and information on all its products and services can be found at www.TheoremSolutions.com.

-ENDS-

Editor’s note:
For further information please call John Wedrychowski at Theorem Solutions Ltd on: +44 (0)1543 444455; email: Email Contact or see Theorem Solutions’ website: www.TheoremSolutions.com.

Editorial contact: Sue Deane at Anderson Burnbreck Ltd on: +44 (0)1242 518399 or e-mail: Email Contact.


Issued on behalf of Theorem Solutions:

Theorem Solutions Ltd                        Theorem Solutions Inc.
Tame House                                        6279 Tri-Ridge Boulevard
Wellington Crescent                                Suite 240
Fradley Park                                        Loveland
Staffordshire                                        Ohio 45140
WS13 8RX England                        USA
Tel: +44 (0) 1543 444455                Tel: +1 513 576 1100
Fax: +44 (0) 1543 444454                Fax: +1 513 576 1110



Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise