SolidCam June 2007 Newsletter

June News from SolidCAM
June News from SolidCAM
Newsletter June 2007



Customer Survey 2007

New Technology Training Center for SolidCAM in the Czech Republic

SolidCAM supports new Turn-Mill machine

Trade shows in Eastern Europe


Customer Survey 2007

It is very important for SolidCAM to learn, how satisfied our customers are with our products, services and organization. We therefore conduct a worldwide customer survey.

As the completion time for this survey is about 5 minutes, we ask all our customers to click on the link below to fill out the survey.

SolidCAM Customer Survey 2007

Dear MCADCafe Reader,

When we founded the company more than 20 years ago, we had a close and personal contact to all our initial customers. Meanwhile the SolidCAM family has grown so rapidly, that we now have to support more than 12,000 installations worldwide. Although we try to meet as many customers as possible, it has become difficult to maintain the same level of personal contact. Nevertheless, the opinions and experiences of our customers are extremely important to help us to improve your productivity and efficiencies utilizing SolidCAM.

Dear reader, if you are a SolidCAM customer, we are inviting you to participate in the "SolidCAM customer survey 2007" to insure that we are providing you with the best possible software and services. Please click on the link:

SolidCAM Customer Survey 2007

and fill it out until June, 30, 2007 . You will not only participate in the drawing for an " IPOD NANO ", but mainly assist us to improve our products and services.

We thank you in advance for your active contribution and we hope you enjoy the Newsletter.

Emil Somekh
Managing Director
SolidCAM Ltd.

  • New Technology Training Center for SolidCAM in the Czech Republic

  • On June 5, the opening of the new Technology Training Center ("TTC") for SolidCAM in the Czech Republic has been celebrated. The TTC, a new division of SolidCAM´s reseller SolidVision, is located at the facilities of the main technical school in Brno (Moravia). Representatives of the public authorities and the partner companies Hermle, Iscar, SolidWorks and SolidCAM attended the ceremony.

    The main purpose of the TTC is to provide the industry with advanced technical support and services for the manufacturing of complex parts. This covers the complete range of milling applications with special focus on 5-axis indexial and simultaneous machining.The TTC is equipped with a Hermle C20 5-axis machine tool, Iscar cutter tools and the full range of the SolidCAM+ SolidWorks software. It will offer advanced training courses for operators and programmers, where the optimal combination of NC- strategies, machine tool and cutter tool parameters will be adressed for complex machining jobs.

    Read more about this innovative center...

  • SolidCAM supports new Turn-Mill machine

  • One of SolidCAM´s partners in Taiwan is the machine tool company Feeler . Established in 1985, Feeler has become a leading manufacturer of vertical and horizontal machining centers in Taiwan. Feeler also launched a series of CNC Lathe centers, which are highly regarded in the market.

    In the Taipei International Machine Tool Show TIMTOS Feeler teamed up with SolidCAM`s reseller CAMRight to present advanced manufacturing solutions. One focus was the newly announced Turn-Mill machine FTC-350 SLY with back spindle, which has been programmed with SolidCAM2007 R11. SolidCAM developped also a dedicated post processor for this machine.

    Learn more about Feeler...

  • Trade shows in Eastern Europe

  • For the first time SolidCAM has been present at the Belgrade Technical Fair in Serbia, the biggest technical show in South-Eastern Europe. The show took place from May 8 to May 12 in Belgrade and attracted more than 35,000 visitors. SolidCAM´s new Serbian reseller Solfins demonstrated SolidCAM2007 integrated in SolidWorks2007.

    Premium Solutions , SolidCAM´s reseller in Poland, exhibited at the PLASTPOL show in Kielce, the most important Polish trade show in for mold and die makers (see photo ). This year PLASTPOL hosted nearly 800 exhibitors from 29 countries. The booth of Premium Solutions in Hall E attracted an increasing number of visitors, who saw demonstrations of the new version SolidCAM2007 R11. The automation of the complete moldmaking process by the combined SolidWorks+ SolidCAM solution, including High-Speed machining and 5 axis simultaneous milling, grabbed the attention of the Polish tool and die makers.


    :: +49-170-5773814


    Review Article Be the first to review this article
    Autodesk - DelCAM

    Featured Video
    Jeff RoweJeff's MCAD Blogging
    by Jeff Rowe
    Apple Adding To Computer Product Line Minus Ports
    Currently No Featured Jobs
    Upcoming Events
    Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
    Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
    Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
    TurboCAD pro : Limited Time offer

    Internet Business Systems © 2016 Internet Business Systems, Inc.
    595 Millich Dr., Suite 216, Campbell, CA 95008
    +1 (408)-337-6870 — Contact Us, or visit our other sites:
    AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
      Privacy Policy Advertise