Dassault Partners with Rolls-Royce for Future Mid-Sized Falcon

SAINT-CLOUD, FRANCE -- (MARKET WIRE) -- Jun 15, 2007 -- Dassault Partners with Rolls- Royce for Future Mid-Sized Falcon

Charles Edelstenne, Chairman and CEO of Dassault Aviation, today announced Rolls-Royce has been selected as the engine partner for Dassault's future super mid-sized Falcon. The decision was made following a thorough analysis and study involving five engine manufacturers.

"One of the keys to success of any aircraft program is the choice of engine partners. Rolls-Royce has demonstrated their capability to provide an all-new engine in the 10,000 lb thrust range that will meet our exacting requirements in terms of reliability, performance and fuel efficiency with minimum environmental impact." said Charles Edelstenne at Dassault's press conference. "The new partnership between Dassault and Rolls-Royce will be a winning formula in this rapidly growing segment of the business jet market."

With the certification and first deliveries of the Falcon 7X complete, Dassault has now focused attention on pre-developing a new super mid-sized Falcon. After the propulsion, other major technological choices will be finalized within the next twelve months.

Contact :

Yves ROBINS, Communication institutionnelle

tél: + 33 (0)1 47 11 86 90

Vadim Feldzer, Communication Avions Civils

tél: + 33 (0)1 47 11 44 13


This information is provided by CompanynewsGroup





Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Re-Use Your CAD: The ModelCHECK Handbook
Jobs
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise