Rapid Manufacturing Spearheading Growth of the World Rapid Prototyping Equipment Markets

PALO ALTO, Calif., June 13 /PRNewswire/ -- The evolution of 3D printers driven by severe pricing pressures has made concept modeling and rapid prototyping affordable to most end users. Undoubtedly, the growing trend toward rapid manufacturing has taken the industry to the next level.

New analysis from Frost & Sullivan

( http://www.testandmeasurement.frost.com), World Rapid Prototyping Equipment Markets, reveals that the market earned revenues of $300.0 million in 2006 and estimates this to reach $859.4 million in 2013.

If you are interested in a virtual brochure, which provides manufacturers, end users, and other industry participants with an overview of the World Rapid Prototyping Equipment Markets, send an e-mail to Sara Villarruel, Corporate Communications, at Email Contact with your full name, company name, title, telephone number, fax number, e-mail, address, city, state, and country. We will send you the information via e-mail upon receipt of the above information.

With prices of 3D printers ranging from $15,000 to $60,000, small companies find them extremely affordable to use for concept modeling and design optimization. In addition, the use of additive fabrication technology to directly manufacture the product has become increasingly popular, especially for low volume applications.

Rapid manufacturing is particularly useful when the part complexity is difficult to conceive in traditional manufacturing processes. Hearing-aid application in the medical industry is an example that is worth mentioning. Rapid manufacturing is expected to become mainstream in the future, and eventually drive the growth of the rapid prototyping equipment market.

"Even though rapid prototyping has been adopted early on by the automotive and aerospace markets, research indicates that only a handful of companies, about 15 to 20 percent of the end users worldwide, have taken advantage of the various rapid prototyping technologies," notes Frost & Sullivan Senior Research Analyst S. Vidyasankar. "This clearly demonstrates that the technology's potential has not reached the end users over the years, and thus highlights the need to elevate their awareness levels."

End-user education should focus on the acquisition and cost of new equipment as well as the capabilities of various technologies such as stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), jetted polymer techniques and their applications.

With rapid manufacturing gaining interest among end users, it is imperative for equipment manufacturers to educate the users to ensure sustenance for the market and accelerate the growth of the rapid prototyping equipment market in the future.

Furthermore, market participants may overcome this challenge by increasing their marketing efforts, participating in major industry events, and utilizing the Internet as a tool to keep end users as well as the industry abreast of the latest technological advancements within the rapid prototyping equipment market.

"There is also an increasing interest and growing trend toward services within the rapid prototyping market," notes Vidyasankar. "Even though many participants work closely with service bureaus, customers have forced rapid prototyping equipment manufacturers to provide services, thereby creating key opportunities for rapid prototyping vendors to develop their own service departments that meet customer requests for short-run rapid manufacturing and rapid prototyping needs and thereby grow in business."

World Rapid Prototyping Equipment Markets is part of the Test and Measurement Growth Partnership Service Program, which includes research services in the following markets: machine vision systems, x-ray inspection equipment, and general purpose test equipment. All research services included in subscriptions provide detailed market opportunities and industry trends evaluated following extensive interviews with market participants. Interviews with the press are available.

Frost & Sullivan, a global growth consulting company, has been partnering with clients to support the development of innovative strategies for more than 40 years. The company's industry expertise integrates growth consulting, growth partnership service, and corporate management training to identify and develop opportunities. Frost & Sullivan serves an extensive clientele that includes Global 1000 companies, emerging companies, and the investment community by providing comprehensive industry coverage that reflects a unique global perspective, and combines ongoing analysis of markets, technologies, econometrics, and demographics. For more information, visit http://www.frost.com.

                  World Rapid Prototyping Equipment Markets
                                     N191

    Contact:
    Sara Villarruel
    Corporate Communications - North America
    P: 210.477.8448
    F: 210.348.1003
    E: 
Email Contact

    Joanna Lewandowska
    Corporate Communications - Europe
    P: +48 22 390 41 46
    E: 
Email Contact

    Donna Jeremiah
    Corporate Communications - Southeast Asia
    P: +603 6304 5832
    F: +603 6201 7402
    E: 
Email Contact

    Nimisha Iyer
    Corporate Communications - South Asia, Middle East
    P: +91 22 40013431
    F: +91 22 2832 4713
    E: 
Email Contact

    Sara Villarruel
    Corporate Communications - Latin America
    P: 210.477.8448
    F: 210.348.1003
    E: 
Email Contact

    Bo Zhang
    Corporate Communications - China
    P: +86 21 5407 5780-86 ext 8611
    F: +86 21 5407 5825
    E: 
Email Contact

    Sharmin Jassal
    Corporate Communications - Australia & New Zealand
    P: +61 2 8247 8900
    F: +61 2 9252 8066
    E: 
Email Contact

    Patrick Cairns
    Corporate Communications - Africa
    P: +27 21 680 3274
    F: +27 21 680 3296
    E: 
Email Contact

    
http://www.frost.com

Keywords in this press release: rapid manufacturing, rapid prototyping, 3D printers, pricing pressures, concept modeling, additive fabrication, stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), jetted polymer techniques, service bureaus

Web site: http://www.testandmeasurement.frost.com/
http://www.frost.com/




Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Senior Structural Engineer for Design Everest at San Francisco, CA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise