LMS Virtual.Lab Fast Trim Delivers Efficient Acoustic Multilayer Modeling

Leuven, Belgium  – June 6, 2007 – LMS, the engineering innovation company, today announced the introduction of LMS Virtual.Lab Fast Trim, a dedicated modeling and simulation solutions to assess the acoustic behavior of multi-layer acoustic trim panels. Acoustic isolation packages based on these multi-layer trim are increasingly used in automotive and aerospace applications to efficiently control the interior sound of a vehicle or aircraft and to increase overall driver and passenger comfort.

Trim panels with multiple layers set specific challenges for acoustics engineers in terms of creating simulation models that deliver reliable results in the higher frequencies ranges. In these ranges, acoustic decoupling as well as porous and visco-elastic effects dominate the acoustic performance.

The new Fast Trim solution in LMS Virtual.Lab Acoustics is capable of accurately modeling these critical effects with minimal efforts and therefore delivers the required reliability. 

After setting up the multilayered layout of a panel and defining the properties of its constituting layers, the transfer admittances of the complete trim structure are calculated as function of frequency. In a subsequent vibro-acoustic FE (Finite Element) analysis, LMS Virtual.Lab Acoustics simulates the performance of the multilayer trim in the presence of flexible panels from a vehicle body or airplane fuselage. Short simulation runs reliably predict the acoustic performance at higher frequency and accelerate the acoustic optimization process. This allows acoustics engineers to better exploit the tremendous potential of trim when shaping the targeted interior sound.

LMS Virtual.Lab Fast Trim has been successfully adopted by several automotive and aerospace OEMs to optimize the trim packaging and layout. Initial user feedback confirmed the ease-of-use of the modeling tool, the calculation speed of the solution and the accuracy of the analysis results.  "LMS Virtual.Lab Fast Trim not only provides very accurate results compared to measured data, but also performs the simulations at significantly high speed, allowing the software to be deployed on industrial-size projects," said Hirotaka Shiozaki, Manager of the CAE and Digital Engineering Group at Mitsubishi’s Vehicle Development Engineering Center in Okazaki, Japan.

For high resolution images, please visit http:// www.lmsintl.com/pressimages

For more information on LMS Virtual.Lab, please visit http://www.lmsintl.com/virtuallab

About LMS

LMS is an engineering innovation partner for companies in the automotive, aerospace and other advanced manufacturing industries. LMS enables its customers to get better products faster to market, and to turn superior process efficiency to their strategic competitive advantage. LMS delivers a unique combination of virtual simulation software, testing systems, and engineering services. We are focused on the mission critical performance attributes in key manufacturing industries, including structural integrity, handling, safety, reliability, comfort and sound quality. Through our technology, people and over 25 years of experience, LMS has become the partner of choice for most of the leading discrete manufacturing companies worldwide. LMS, a Dassault Systèmes SIMULIA partner, is certified to ISO9001:2000 quality standards and operates through a network of subsidiaries and representatives in key locations around the world. For more information on LMS, visit the company’s web site at www.lmsintl.com.

 

LMS Press Contacts:

Corporate:                                      
Bruno Massa                                  
Tel +32 16 384 200                         
bruno.massa@lmsintl.com                                                                   

Germany:                                    France:                                        Italy:
Norbert Reimann                          Myriam Degroux                          Alessandra Fabiani
Tel +49 7152 97 97 90                  Tel + 33 1 69 35 19 20                  Tel +39 0321 44 50 11
Email Contact
       Email Contact                                                   alessandra.fabiani@lmsintl.com   

United States:
Kimberly Winkler
Tel +1 248 952 5664
kimberly.winkler@lmsintl.com        

Japan:                                            China:                                             Korea:
Maki Hisano                                    Susan Wu                                       Suk Hee Jeon
Tel +81 45 478 4800                        Tel +86 10 8497 6463                      Tel +82 2 571 7246      
maki.hisano@lmsintl.com                susan.wu@lmsintl.com                   sukhee.jeon@lmsintl.com

Kim Winkler
Marketing Manager
LMS NA
Ph: 248-952-5664
Fax: 248-952-1610

www.lmsintl.com




Review Article Be the first to review this article
Rand3D

Featured Video
Jobs
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
Structural Engineer for Albert Kahn and Associates at Detroit, MI
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Upcoming Events
Design for Metal Additive Manufacturing Short Course at Revere Hotel Boston Common 200 Stuart St Boston MA - Nov 27 - 28, 2017
IMTS2018 International Manufacturing Tech Show at McCormick Place Chicago IL - Sep 10 - 15, 2018
Kenesto: 30 day trial
MasterCAM



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise