TopSolid’Cam at the Bourget - June 18 - 24

June 1, 2007 - TopSolid’Cam will be exhibited at the Bourget Aeropspace trade fair in Paris from 18-24 June, Hall 3, Stand B. With a very strong penetration in this market the Bourget is an important meeting point for Missler Software and its customers.

Missler Software is the number one provider of CAM solutions to aerospace sub-contractors in France. With such references as Turbomeca, Sagem, MBDA, Mecachrome, Airbus Cimpa... TopSolid’Cam is widely recognised as the leading CAM solution in this field.

TopSolid'Cam is the CAD/CAM solution chosen by many aerospace companies thanks to its capacity to respond to the specific demands of this sector: high quality and reliability as well as the need to reduce production costs. TopSolid'Cam proposes custom functions to manage aerospace parts such as:

Topological analysis
Stock management
Dedicated « quality surface » cycles
Collision management
5 axis milling
Driving of complex multi-function machines

Here are 2 new TopSolid’Cam 2007 functions which will greatly facilitate the aerospace sub-contractor’s life:

2D multi-pocketing – This function, greatly improved on previous versions, enables the detection of grooves and facilitates the detection of faces to be machined. This is an important improvement for the aerospace industry, amongst others, and protects the thin part walls of parts commonly machined by this industry.

Insert life management – This new function permits retract movements so that the operator can replace the used inserts when necessary. The programmer has the choice to change the inserts between several convenient moments (at the end of the current pass, the beginning of the following, real-time pass, etc.) The possibility to change inserts when necessary is an important improvement for the machining of hard materials, notably in the aerospace industry.


Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise