Frost & Sullivan Recognizes Dassault Systemes for Digital Manufacturing

PALO ALTO, Calif., April 17 /PRNewswire/ -- Frost & Sullivan selected Dassault Systemes (NASDAQ: DASTY) and DELMIA as the recipient of the 2007 Company of the Year Award within the North American product lifecycle management (PLM) solutions space.

Recognized as the leader in the global PLM solutions market, the company is known for its pioneering technological innovations in digital manufacturing that help customers innovate throughout the product lifecycle.

"Innovations at Dassault Systemes have been inspired by consistent focus to provide value-added solutions and services to the end-users and have taken on new meaning with the introduction of DELMIA Automation solutions," notes Frost & Sullivan Industry Manager Kishan M. Bhat. "DELMIA is the premier brand of Dassault Systemes for digital manufacturing solutions, focused on two unique software applications that streamline manufacturing processes, DELMIA PLM and DELMIA Automation."

The solutions assist industries where the optimization of manufacturing processes is critical, including automotive, aerospace, fabrication and assembly, electrical and electronics, consumer goods, plant, and shipbuilding sectors.

"DELMIA Automation has strengthened the core of the Dassault Systemes PLM offering," states Bhat. "With this innovative automation solution, the company has taken digital manufacturing to new heights by integrating the mechanical definition of the factory with the control logic built in the programmable logic controllers (PLC)."

Process and manufacturing industries are leveraging these solutions to increase their throughput and obtain advanced visibility into the process and manufacturing lifecycle on a virtual commissioning platform.

The DELMIA Automation virtual commissioning solution enables greater efficiency in validation and the control engineer can leverage the virtual model of the machine or cell to explore as many 'what if?' scenarios that are otherwise extremely difficult to validate.

"A critical success factor for the market adoption of virtual commissioning is the speed and ease-of-use in building the virtual environment," remarks Bhat. "DELMIA Automation's re-useable smart devices allow any company to build a library of smart devices that describe the behavior of a device, without the need to re-write that behavior. As a result, less time is spent in building the virtual environment while using pre-validated components at the same time."

The entire DELMIA suite of applications comprises leading digital manufacturing solutions that integrate with the PLM solutions from Dassault Systemes, like CATIA, ENOVIA, and SIMULIA.

Leading manufacturers in the automotive, aerospace, shipbuilding, consumer-packaged goods (CPG) and hi-tech industries have deployed the PLM offering from Dassault Systemes and have continuously raised the bar on operational excellence.

The company also provides efficient integration with enterprise resource planning (ERP) solutions to complete the business lifecycle management.

Each year Frost & Sullivan presents this Award to the company that has demonstrated excellence within its industry based on numerous factors including business development, competitive strategy and market leadership. The Award recognizes outstanding management, consistent growth, and positive social and economic impact on local and national communities and customers.

Frost & Sullivan Best Practices Awards recognize companies in a variety of regional and global markets for demonstrating outstanding achievement and superior performance in areas such as leadership, technological innovation, customer service, and strategic product development. Industry analysts compare market participants and measure performance through in-depth interviews, analysis, and extensive secondary research in order to identify best practices in the industry.

About Dassault Systemes

As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systemes brings value to more than 90,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systemes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance. The Dassault Systemes portfolio consists of CATIA for designing the virtual product -- SolidWorks for 3D mechanical design -- DELMIA for virtual production -- SIMULIA for virtual testing and ENOVIA for global collaborative lifecycle management, including ENOVIA VPLM, ENOVIA MatrixOne and ENOVIA SmarTeam. Dassault Systemes is listed on the Nasdaq (DASTY) and Euronext Paris (#13065, DSY.PA) stock exchanges. For more information, visit http://www.3ds.com

CATIA, DELMIA, ENOVIA, SIMULIA and SolidWorks are registered trademarks of Dassault Systemes or its subsidiaries in the US and/or other countries. All other companies and products mentioned herein may be the trademarks of their respective owners.

About Frost & Sullivan

Frost & Sullivan, a global growth consulting company, has been partnering with clients to support the development of innovative strategies for more than 40 years. The company's industry expertise integrates growth consulting, growth partnership services, and corporate management training to identify and develop opportunities. Frost & Sullivan serves an extensive clientele that includes Global 1000 companies, emerging companies, and the investment community by providing comprehensive industry coverage that reflects a unique global perspective and combines ongoing analysis of markets, technologies, econometrics, and demographics. For more information, visit http://www.awards.frost.com.

    Contact:
    Stacie Jones
    210.247.2450
    
Email Contact

Web site: http://www.frost.com/
http://www.3ds.com/




Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.


Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise