Schott Systeme Showcases CAD/CAM Solution

Schott Systeme Showcase CAD/CAM Solution at Euromold Design Forum

By special invitation of the 'Design and Engineering Forum' at Euromold 2006, CAD/CAM developer Schott Systeme GmbH showcased their latest range of 2D/3D design and machining tools to a packed group of designers and engineers alike.

With the focus of the forum being firmly on fully integrated design and engineering, visitors were given a 20 minute 'live' presentation on how an initial 'designers concept sketch' can be converted into a 3D prototype design, complete with mold tool construction, moldtool machining, photo-realistic rendering and graphical project management.

Removing the need to purchase differing software products for different stages of design and machining, the presentation gave an insight into both time savings and cost savings using a fully integrated solution such as their product 'Pictures by PC 3.2'.

View video demo at http://www.schott-systeme.com/en/newintrovideo-en.htm

About Schott Systeme GmbH

Having developed the same software solution for over 25 years, Schott Systeme can claim to be one of the very first founders of the CAD/CAM market. Seen very much as an innovator within both the CAD/CAM and 'Graphics' field, the company supplies cost effective solutions ranging from 2D/3D design and graphics priced at 2,800 Euro, through complete design and manufacture for under 10,000 Euro.

Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017
SolidCAM: Program your CNCs directly inside your existing CAD system.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise