SunPower Inaugurates Automated Solar Panel Manufacturing Plant

 nPower Products 
 On Sale !

 Best Prices
 Fastest Delivery 
 Direct From 

New Plant Incorporates Advanced Panel Manufacturing Process

SAN JOSE, Calif., Aug. 15 /PRNewswire-FirstCall/ -- SunPower Corporation (NASDAQ: SPWR), a Silicon Valley-based manufacturer of the world's highest efficiency, commercially available solar cells and solar panels, today inaugurated its advanced, automated solar panel manufacturing plant, located in the Philippines near to the company's SPML solar cell factory. SunPower expects to produce up to 30 MW (megawatts) of solar panels per year from its first manufacturing line in the new plant. The production facility has sufficient space to expand capacity to 90 MW per year.

SunPower's new automated line was designed to capitalize on the inherent cost advantages of its all-back contact cell architecture. Unlike conventional solar cells that require a complicated and expensive process to "weave" conducting metallic ribbons between the front surface of one cell and the back of the adjacent cell, SunPower's high-efficiency, all-back contact solar cells can be easily interconnected in a single plane with simple metal tabs. This process also allows the reflective metal elements to remain completely hidden from view, greatly improving the aesthetic appearance of the finished solar panel.

"SunPower's new solar panel manufacturing process is more highly automated than the industry standard and incorporates novel processes enabled by our unique cell architecture," said PM Pai, COO of SunPower Corporation. "The advancements to panel manufacturing that we will bring into production this quarter are a key element of our overall product cost reduction roadmap. After we have proven this manufacturing technology here in the Philippines, we may consider locating similar plants close to our end-markets, thereby squeezing out more costs by lowering supply chain expenses."

About SunPower

SunPower Corporation designs and manufactures high-efficiency silicon solar cells and solar panels based on an all-back contact cell design. SunPower's solar cells and panels generate up to 50 percent more power per unit area than conventional solar technologies and have a uniquely attractive, all-black appearance. For more information on SunPower or solar technology, please visit the SunPower website at SunPower is a majority-owned subsidiary of Cypress Semiconductor Corp. (NYSE: CY).

Forward-Looking Statement

Statements made in this release that are not historical in nature and that refer to SunPower's plans and expectations for the future, including the expansion of its production capacity overall, the installation of additional production lines at the new facility, the expected megawatt capacity of the new facility on a fully built-out basis, the current schedule for the additional production lines in the new facility, the expected efficiency of the Company's Gen 2 solar cells, the schedule for commencing production at the new facility, and the possibility of constructing new plants closer to SunPower's end markets, are forward-looking statements made pursuant to the Private Securities Litigation Reform Act of 1995. We use words such as "estimates," "anticipates," "believes," "expects," "future," "look forward," "planning," "intends" and similar expressions to identify such forward-looking statements. Our actual results may differ materially due a variety of factors, including but not limited to, our ability to effectively fund and manage the build out of the new facility and future facilities, the demand for our products as well as the risks identified in our filings with the Securities and Exchange Commission. All forward-looking statements included in this release are based upon information available to SunPower as of the date of this release, which may change, and we assume no obligation to update any such forward-looking statement.

SunPower is a registered trademark of SunPower Corporation. Cypress is a registered trademark of Cypress Semiconductor Corp. All other trademarks are the property of their respective owners.

Web site:


Review Article Be the first to review this article

IMTS 2018 Register Now>>

Featured Video
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Upcoming Events
Inside 3D Printing Seoul 2018 at Korea International Exhibition Center (KINTEX), Hall 5 408 Hallyuworld-ro, Ilsanseo-gu, Goyang-si, Gyeonggi-do Goyang Korea (South) - Jun 27 - 29, 2018
AMTEX 2018 at Pragati Maidan New Delhi India - Jul 6 - 9, 2018
34th Annual Coordinate Metrology Society Conference 2018 at Grand Sierra Resort, 2500 East Second Street Meeting & Covention Center Reno NV - Jul 23 - 27, 2018
Kenesto: 30 day trial
SolidCAM: Break the Chains

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise