W.L. Gore & Associates Reduces Customer Response Time With Synergis Adept EDM

W.L. Gore & Associates, Inc. Reduces Customer Response Time from Days to Minutes Across Global Teams with Synergis Adept EDM Software

Achieves Business Objective for Global Design Collaboration


Quakertown, PA, June 20, 2006 — Synergis Software, an independent division of Synergis Technologies, Inc., today announced that W.L. Gore & Associates is able to reduce its response to customer requests across its trans-global teams from two days to 15 minutes as a result of deploying Synergis Adept® engineering and product data management (EDM/PDM) system. W.L. Gore & Associates, pioneers of using GORE® ePTFE membranes for air filtration applications, needed a software system that would link design centers in the U.S. and U.K. and allow access from multiple manufacturing locations around the world.

“After searching and evaluating multiple EDM software packages, Synergis Technologies was the only company we felt had a solution that would work globally. Other companies talked about being able to link multiple locations. Synergis was able to demonstrate it with existing customers,” said Gregory Ayres, Gore’s ERP Division Champion.

Currently Gore has 15 licenses being accessed by 60 users spread across the U.S., U.K., mainland Europe and the Far East. Being a global company allows Gore to use international time differences to its benefit and the Synergis license policy gives them the flexibility to take full advantage of this. Having the option to lock or assign licenses to specific users means they don’t need to worry about the main users being locked out when they need immediate access. Additionally, the security features in Adept fit in with Gore’s plans perfectly, as the company was able to allow users access without fear of compromising its data.

The advantages of Adept can be easily recognized when evaluating a specific project. Ayres explains, “We have taken numerous orders in both continents where the design actually originated on the other side of the world. This usually occurs when a multinational company purchases or opens a facility in a new region which uses the same filtration equipment as the parent. In the past, if the request was taken after the originating design office had gone home for the day, the remote manufacturing site or sales office would have to wait until the responding design office could contact the originating design office and have the design information emailed over. Response to the customer could be 24 to 48 hours or up to 72 hours if it fell on a weekend. With Adept, our associates are able to review the design and answer the customer inquiry immediately, regardless of where the design originated. In fact, when design information is required, we decreased customer response time from 24 to 48 hours to less than 15 minutes. We now have the ability to reduce the design time by sharing design workload between the two design teams.”

About Synergis Software

Synergis Software, a proven leader in EDM solutions since 1989, provides customers with an expert resource for all pre- and post- data management implementation requirements. Its Synergis Adept system works with multi-CAD product design environments including AutoCAD, Autodesk Inventor, and SolidWorks software. For more information or to register for a live presentation of Synergis Adept, please contact Synergis at 215-529-9900/800-836-5440 or visit www.synergis-adept.com.

# # #

™GORE is a trademark of W. L. Gore & Associates, Inc. All products are trademarks or registered trademarks of their respective companies. Copyright 2006 Synergis Technologies, Inc. All rights reserved.

Rating:


Review Article Be the first to review this article

Featured Video
Editorial
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Siemens Goes ECAD With Mentor Graphics Acquisition
Jobs
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
Design & Manufacturing, Feb 7 - 9, 2017 Anaheim Convention Center, Anaheim, CA at Anaheim Convention Center Anaheim CA - Feb 7 - 9, 2017
Innorobo 2017 at Docks de Paris Paris France - May 16 - 18, 2017
Display Week 2017 at Los Angeles Convention Center 1201 S Figueroa St Los Angeles CA - May 21 - 26, 2017



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise