Mastercam's New High Speed Toolpaths

PRESS RELEASE For Immediate Release
March 2006
Contact: Michelle Nemeth
Phone: (860) 875-5006
Fax: (860) 872-1565
Email Contact


CNC Software showcases new toolpaths at Eastec 2006

West Springfield, MA -- The Eastec show ushers in the latest CAD/CAM software from CNC Software Inc. Mastercam X's Maintenance Release (MR1) will be showcased in booth # 5527 at the Big E Fairgrounds in West Springfield, MA on May 23-25. Seven new toolpaths (2 roughing and 5 finishing) have been incorporated into the MR1 release, and include a new interface for toolpath creation. These new toolpath types are tailored to high speed machining and hardmilling. They offer a smooth cutting motion along with smooth entry/exits.

Core Roughing - A new strategy for Mastercam that is designed for core machining. The toolpath intelligently cuts the part from the outside in, and always climb cuts, reducing the risk of damaging specialty insert cutters. The toolpath changes its cutting method to inside out when internal pockets are encountered. This minimizes the need for helical ramping or full-width cutting.

Area Clearance -- A new strategy for Mastercam designed for cavity machining. Similar to Core Roughing, it uses Z slices through the model at different depths. Area Clearance is designed for clearing large amounts of material starting from the center of the part and working outwards.

Waterline -- Also generated from a set of constant Z slices, this toolpath is best suited for semi-finishing and finishing. Waterline has an automatic smooth entry/exit calculation and provides smooth transitions from one Z level to the next.

Scallop -- Generates 3D passes at a constant distance from each other along the surface of the part, starting from the outside and working in. This toolpath lets the user control the scallop height, allowing for very smooth finishes.

Horizontal Area -- Automatically recognizes and machines flat areas. This toolpath shows off the "minimum distance" retract motion (which is also available in all other high speed toolpaths) to avoid the part while moving from region to region.

Raster -- Similar to parallel machining with the added benefit of smoothing sharp corners in the toolpath motion. Features like toolpath filleting optimize the toolpath for smooth motion, which is available in Raster and other high speed toolpaths.

Pencil -- Newly enhanced, Pencil identifies all the "seams" of a part and develops a toolpath along those seams. Additional cuts can be added that are offset from the initial pass. The Pencil toolpath conforms to the shape of the part, creating a superior surface finish.

These toolpaths are tailored to high speed machining and hardmilling by offering smooth cutting motions and smooth entry/exits. They are also useful for many applications by offering several cutting styles, the ability to change the cutting style, and having controls like steep/shallow angle limits, rest passes, and holder gouge checking. For more information, please visit

# # # # #

About Mastercam

Developed by CNC Software, Inc., Mastercam is Windows®-based CAD/CAM software for 2- through 5-axis milling and turning; 2- and 4-axis wire EDM; 2D and 3D design, surface, and solid modeling; artistic relief cutting, and 2D and 3D routing. CNC Software is a privately owned corporation founded in 1984. The U.S.-based company provides Mastercam CAD/CAM solutions to more than 85,000 installations in 75 countries in industries including mold-making, prototyping, automotive, medical, aerospace, and consumer products. Mastercam runs under Windows 2000 and Windows XP and is compatible with all other CAD/CAM systems. For more information about CNC Software, Inc. and its Mastercam family of products, contact CNC Software, Inc., M - F, 8 AM - 6 PM EST at (800) 228-2877 or (860) 875-5006, 671 Old Post Road Tolland, CT 06084. Or visit


Review Article Be the first to review this article
Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
TurboCAD pro : Start at $299

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise