SAMTECH To Create Wind Turbines Design And Verification Facility

SAMTECH to create an Expertise Centre in Barcelona for Wind Turbines Design and Verification

Liège, Belgium, February 2006. SAMTECH, European specialist for the development of Integrated CAE Solutions using Finite Element Method, announces today that its Iberian subsidiary becomes its competence centre for the global design and the detailed mechatronic verification of Wind Turbines, using non-linear Finite Element Method coupled with Multi-Body-System approach and Aerodynamics.

As new competence centre, SAMTECH Iberica regroups top-class engineers in transmissions, mechatronic design and advanced numerical simulation applied to wind turbines design and verification. The team proposes new innovative solutions based on the integration of complementary disciplines like non-linear FEM technologies for composite blades and structures, state-of-the-art gearbox modelling capabilities, generator models, servomechanisms and turbine controllers into a unified modelling environment referred to as SAMCEF for Wind Turbines. The core component of this new environment is the powerful and generic non-linear FEA/MBS solver SAMCEF Mecano, developed by SAMTECH since 15 years and definitely generalizing the FEM based numerical approach to complex mechanical systems.

"Wind turbine power trains are subjected to a very diverse spectrum of dynamic loads which depend on the dynamic properties of the complete mechatronical wind turbine system ", explains Andreas Heege, Manager of SAMTECH Iberica. " The implicit dependence of power train loads on the dynamic characteristics of the assembled wind turbine excludes the classical decoupling of Finite Element Analysis and Multi-Body Simulation techniques. For this reason, the coupled mechanisms, structures and control formulation of SAMCEF Mecano, based on a Finite Element approach has been complemented by new components for aerodynamic loads evaluation and by specific post-processing tools for detailed evaluation of wind turbine power trains Lifecycle".

SAMTECH Iberica expertise applies to the full development cycle, from pre-concept and initial design, over detailed dynamic modelling of the entire wind turbine, to final optimisation phase. SAMTECH Iberica brings thus a huge experience in virtual modelling that experimental data acquisition cannot provide during early design process.

In order to guarantee a very high level of know-how and services, SAMTECH Iberica benefits from SAMTECH HQ assistance, which means a direct support of SAMTECH generic development teams and experts with a combined experience of more than 20 years in virtual prototyping development programs for major industrial customers.

"In addition to its generic engineering software offer, SAMTECH also develops very innovative solutions customized towards the specific needs of some industrial market segments" says Eric Carnoy, Chief Executive Officer of SAMTECH Headquarters. "Because of the strong demand of Wind Turbine market for such combined Product and Engineering expertise, SAMTECH decided to form a team of top engineers in Barcelona".

SAMTECH Iberica will take part as exhibitor (booth N° 127 and 135) in the EWEC 2006 European Wind Energy Conference that will be held in Athens from February 27th to March 2nd, 2006. EWEC 2006 will be an effective opportunity to demonstrate the advanced capabilities of SAMCEF for Wind Turbines, unique professional solution dedicated to wind turbine engineering, combining structures, mechanisms and aerodynamic loads.


SAMTECH s.a. is a European leading provider of Computer Aided Engineering (CAE) software for Finite Element Analysis (FEA) and Multi-Disciplinary Optimization (MDO). Founded in 1986 from the Aerospace Laboratory of University of Liège (LTAS, Belgium), SAMTECH develops and markets the general-purpose Finite Element Analysis code SAMCEF, and the Multi-Disciplinary Optimization platform BOSS quattro. Since SAMTECH creation, the invaluable know-how and expertise built up by LTAS researchers and scientists has been continuously enriched by highly skilled development teams. Today, SAMTECH offers very competitive industrial general-purpose software products for linear FEA and non-linear FEA/MBS thermo-mechanical problems, including metallic or composite materials.

SAMTECH also provides industries with dedicated Professional Solutions addressing specific applications to be solved in a particular industrial environment and based on the relevant engineering disciplines. These core products answer to a wide range of industrial needs from the preliminary phases of design to the most advanced verification analyses. The software technology of SAMTECH has an unsurpassed reputation for its quality and reliability. Many major companies have adopted it across all engineering disciplines as an integral part of their design process.

SAMTECH Group currently employs more than 200 people in Belgium, France, Germany, Italy, Spain and UK for technical support, sales and services, and operates through a network of technically advanced distributors in key locations around the world. SAMTECH is a Dassault Systemes partner for the development of its products embedded in or connected to CATIAV5. SAMTECH is certified to ISO9001:2000 quality standards.

For further information about SAMTECH or details on SAMTECH Products/Services offer, please visit

Didier Granville, Chief Marketing Officer

Liège Science Park
Rue des Chasseurs-Ardennais 8
4031 Angleur - BELGIUM
tél: + 32-4-361.69.69
fax: + 32-4-361.69.80
email: Email Contact


Review Article Be the first to review this article
SolidCAM: Program your CNCs directly inside your existing CAD system.

Autodesk - DelCAM

Featured Video
Jeff RoweJeff's MCAD Blogging
by Jeff Rowe
Apple Adding To Computer Product Line Minus Ports
Currently No Featured Jobs
Upcoming Events
3D Collaboration & Interoperability Congress at 1310 Washington Ave. Golden CO - Oct 25 - 26, 2016
Electric&Hybrid Aerospace Technology Symposium 2016 at Conference Centre East. Koelnmesse (East Entrance) Messeplatz 1 Cologne Germany - Nov 9 - 10, 2016
Autodesk University Las Vegas at Las Vegas NV - Nov 15 - 17, 2016
Colortrac: LearnMore
TurboCAD pro : Free Trial

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy Advertise